Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 347 Tube to Union Fittings, where hot solutions of caustic soda, phosphates, or alkaline silicates are used. The removal of organic substances and other residues from the surface of Stainless Steel 347 Tube Fittings, in particular after cold forming with lubricants, is carried out either in special cleaning lines or in the cleaning sections of another processing line. The strip is often moved through several sets of electrodes, which, submerged in the cleaning liquid, electrolytically generate hydrogen gas at the surface of these Stainless Steel 347 Compression Fittings for lifting residues off the strip.
Alloying elements are added to Stainless Steel 347 Compression Tube Fittings in order to improve specific properties such as strength, wear, and corrosion resistance. These Stainless Steel 347 Union Fittings is high – strength low – alloy (HSLA) steels which have the similar aim of improving the general properties of mild steels with small additions of alloying elements that would not greatly increase the cost.
Stainless Steel 347 Tube to Union Fittings | Stainless Steel 347 Tube to Union Fittings | Stainless Steel 347 Tube to Union Fittings | Stainless Steel 347 Tube to Union Fittings | Stainless Steel 347 Tube to Union Fittings | Stainless Steel 347 Tube to Union Fittings | Stainless Steel 347 Tube to Union Fittings | Stainless Steel 347 Tube to Union Fittings
Stainless Steel 347 Ferrule Fittings finds application in marine corrosion areas, equipment for phosphoric acid and fertilizer industry, pollution control equipment, the pulp and paper industry and the petrochemical industry. Advantages of these Stainless Steel 347 Double Ferrule Fittings are over carbon – strengthened high – strength steels which are subject to carburization and decarburization, and thus require a protected or neutral environment.
Stainless Steel 347 Tube to Union Specifications |
||
Specifications | : | ASTM A276 ASME SA 479 |
Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
Brass | : | ASTM B16 ASTM B 453 |
Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
SS 347 Tube To Union Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
SS 347 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 20.00 | 10xC – 1.10 | 9.00 – 13.00 | 62.74 min |
Stainless Steel 347 Tube To Union Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 347 Stainless Steel Ferrule Fitting Tube To Union
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 347 | 1.4550 | S34700 | SUS 347 | – | 08Ch18N12B | – | X6CrNiNb18-10 |
SS 347 Tube To Union Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Stainless Steel 347 Tube To Union Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 347 Tube to Union Fittings
Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 347 Tube to Union Fittings, where hot solutions of caustic soda, phosphates, or alkaline silicates are used.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
Stainless Steel 347 Tube to Union Fittings
Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 347 Tube to Union Fittings, where hot solutions of caustic soda, phosphates, or alkaline silicates are used.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5