Stainless Steel 321 Tube to Union Manufacture

Stainless Steel 321 Tube to Union

Sachiya Steel International is a Leading Manufacture And Exporter For a wide range of Stainless Steel 321 Tube to Union, which has better high temperature properties than 304 or 304L. When comparing the chemical structure of Stainless Steel 321 Compression Fittings against standard austenitic grades such as SS 304 / SS 316 the main separating factor is the Titanium content, which is used as a stabilizing element allowing the material to operate at a higher temperature range. Stainless Steel 321H Compression Fittings should be neglected to mark within the welding seam zone with oleaginous bolts or temperature indicating crayons.

Titanium in Stainless Steel 321 Tube Fittings preferentially reacts with carbon in the steel and prevents precipitation of chromium carbides at the grain boundaries, thus preserving corrosion-resistant properties by preventing depletion of chromium near the grain boundaries during exposure within critical temperature range. Austenitic Stainless Steel 321H Tube Fittings during annealing are heated to fairly high temperatures, typically 1050 Degree C – 1100 Degree C to ensure that all chromium carbides present are dissolved and all of the chromium is taken into solution in the austenite.

Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union  | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union

Stainless Steel 321 Ferrule Fittings is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C. Stainless Steel 321H Double Ferrule Fittings resists polythionic acid stress corrosion cracking in hydrocarbon service.

Stainless Steel 321/321H Tube to Union Specifications

Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass

SS 321/321H Tube To Union Chemical Composition

Grade C Mn Si P S Cr N Ni Ti
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 5(C+N) – 0.70 max
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 4(C+N) – 0.70 max

Stainless Steel 321/321H Tube To Union Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 321/321H Stainless Steel Ferrule Fitting Tube To Union

STANDARD WERKSTOFF NR. UNS JIS EN
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9

 

SS 321/321H Tube To Union Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 321/321H Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 321 Tube to Union

Sachiya Steel International is a Leading Manufacture And Exporter For a wide range of Stainless Steel 321 Tube to Union, which has better high temperature properties than 304 or 304L.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top