Stainless Steel 17-4 PH Bolts Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 17-4 PH Bolts, where short – time and low – temperature heat treatments minimize distortion and scaling. Typical usage of Alloy 17-4 PH Hex Head Bolts is seen in applications requiring high strength and a modest level of corrosion resistance. These Alloy 17-4 PH Hex Head Nuts can be heat treated to high levels of strength and hardness, and features corrosion resistance and machinability comparable to austenitic 304 stainless. The valuable combination of high strength, good corrosion resistance and toughness in Alloy 17-4 PH Hex Head Nuts over both base metals and welds gives designers opportunities to add reliability to their products while simplifying fabrication and often reducing costs.

Stainless Steel 17-4 PH Bolts Manufacturer In India| Stainless Steel 17-4 PH Bolts Manufacturer In Mumbai | Stainless Steel 17-4 PH Bolts Exporter In India| Stainless Steel 17-4 PH Bolts Supplier In India | Stainless Steel 17-4 PH Bolts Supplier In Mumbai | Stainless Steel 17-4 PH Bolts Stockist In India  | Stainless Steel 17-4 PH Bolts Stockist In Mumbai
Stainless Steel 17-4 PH Bolts
Stainless Steel 17-4 PH Bolts

To increase their yield strength, these Alloy 17-4 PH Square Bolts are subjected to heat treatment during precipitation hardening (PH) or age hardening. High strength of Alloy 17-4 PH Square Nuts is maintained to approximately 600 degrees Fahrenheit (316 degrees Celsius). These Alloy 17-4 PH Eye Bolts has adequate resistance to atmospheric corrosion or in diluted acid salts where its corrosion resistance is equivalent to Alloy 304 or Alloy 430.

Alloy 17-4 PH Eye Nuts combines high strength, hardness (up to 572 Degree F / 300 Degree C), and corrosion resistance. Known for its’ corrosion resistance characteristics, the different shapes and finishes of these Alloy 17-4 PH T-Bolts make the composition suitable for a wide variety of environments.

17-4ph Bolt/Nut Specifications

Specifications : ASTM A 479 ASME SA 479
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

SS 17-4ph Bolt/Nut Chemical Composition

SS 17-4ph Ni C Mo Mn Si S Cr
3.00 – 5.00 0.07 0.60 1.50 0.70 0.015 15.0 – 17.0

SS 17-4ph Bolt/Nut Mechanical Properties

Density Melting Point Yield Strength (PSI)
Tensile Strength (PSI) Elongation
7.8
1425 °C
170 190 10 %

17-4ph Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

17-4ph Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 104/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 104 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 104/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 104 3.1 and EN 104 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 17-4 PH Bolts

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 17-4 PH Bolts, where short – time and low – temperature heat treatments minimize distortion and scaling. Typical usage of Alloy 17-4 PH Hex Head Bolts is seen in applications requiring high strength and a modest level of corrosion resistance.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top