Email Us on [email protected] | Call Us on +91 9769056007 | +91 22 66518863

Bolt

Cupro Nickel 70 Bolt Manufacturer

By |2021-12-20T06:25:20+00:00December 20th, 2021|Bolt|

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 70 Bolt And Nuts, which are recognized for fitting reason in the business sector. Cu-Ni 70 / 30 Hex Head Bolts is often used in Salt Water Flanges, Salt Water Piping, Valve Bodies, Sea Water Service, Fittings, Sea Water

Cupro Nickel 90 Bolt Manufacturer

By |2021-12-18T13:34:38+00:00December 18th, 2021|Bolt|

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 90 Bolt These Copper Nickel 90 / 10 Hex Head Bolts have good fabric ability and high inherent resistance to befouling. Cu-Ni 90 / 10 Hex Head Nuts is often used in Condenser Plates, Condensers, Weld Torch Tips, Heat

Titanium Gr 5 Bolt Manufacturer

By |2021-12-18T13:20:03+00:00December 18th, 2021|Bolt|

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 5 Bolts And Nuts, which has good creep resistance up to approx. 300 Degree C (570 Degree F). We are able to machine Titanium Grade 5 Hex Head Bolts, besides the fact it was the first to process this

Titanium Gr 2 Bolt Manufacturer

By |2021-12-17T08:34:38+00:00December 17th, 2021|Bolt|

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 2 Bolt And Nuts, which is sometimes referred to as “Commercial Pure (CP)” due to its approximate yield strength. Designing with these Titanium Grade 2 Hex Head Bolts taking all factors into account has resulted in reliable, economic and

Super Duplex S32750 Bolt Manufacturer

By |2021-12-17T07:48:42+00:00December 17th, 2021|Bolt|

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Super Duplex S32750 Bolt And Nuts, which gives better-guaranteed corrosion resistance. Super Duplex S32750 Hex Head Bolts is the most widely used duplex (ferritic/austenitic) stainless steel grade. The standard Super Duplex S32760 Hex Head Nuts composition has over the years been

Carbon Steel Bolt Manufacturer

By |2021-12-16T07:11:08+00:00December 16th, 2021|Bolt|

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Carbon Steel Bolt and ASTM A563 CS Fasteners Nuts, which have shown good formability in a variety of fabrications. Carbon Steel Counter Sunk Bolts has excellent general corrosion resistance; superior to Grade 316 in most environments, where higher cutting forces are

Duplex Steel S31803 Bolt Manufacturer

By |2021-12-16T06:55:36+00:00December 16th, 2021|Bolt|

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Duplex Steel S31803 Bolt, which always react more sensitively towards precipitation. Duplex S31803 Hex Head Bolts should be ensured that the temperature range between 950 Degree C and 700 Degree C is traversed in no more than two minutes. Due to

Nickel Alloy 201 Bolt Manufacturer

By |2021-12-15T07:00:36+00:00December 15th, 2021|Bolt|

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Bolt, where annealing should be performed in a reducing atmosphere to retain bright finishes. These Nickel 201 Hex Head Bolts has been found that 0.25 % moisture in hydrogen chloride did not affect corrosion rate in both wet

Nickel Alloy 200 Bolt Manufacturer

By |2021-12-15T06:45:56+00:00December 15th, 2021|Bolt|

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Bolt, which is the higher carbon (0.04 – 0.10) version of the alloy. These Nickel 200 Hex Head Bolts has slightly improved corrosion resistance over stainless steel in strongly oxidizing environments. Nickel 200 Hex Head Nuts is also

Monel K500 Bolt Manufacturer

By |2021-12-11T11:01:02+00:00December 11th, 2021|Bolt|

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Monel K500 Bolt Fasteners (Bolts / Nuts), which are also used in domestic, professional or industrial areas. The alloying elements in Monel K500 Hex Head Bolts tend to form either solid solutions or compounds or carbides. Alloying elements in Monel K500

Go to Top