Nickel Alloy 200 Tube to Union Fittings Manufacturer

Nickel Alloy 200 Tube to Union Fittings

Sachiya Steel International is a Leading Manufacturer And Exporter of Nickel Alloy 200 Tube to Union Fittings to the valued customers. With Nickel 200 Compression Fittings (UNS N02200), the restrictions are combined into a single dual chemistry which results in a single alloy with the best characteristics of both. Nickel 200 Tube Fittings is ferromagnetic and has relatively low electrical resistivity. Nickel 200 Ferrule Fittings is used in caustic solutions, food handling equipment, and general corrosion – resistant parts and structures. Nickel 200 Double Ferrule Fittings has a low annealed hardness and very low work – hardening rate.

Meanwhile, these Nickel 200 Union Fittings are also being offered in different sizes and shapes to our customers. With its high metal content, Alloy 200 Compression Fittings unsullied offers smart corrosion resistance to extend warmth properties. Alloy 200 Tube Fittings is utilized for easy fabrication, and could be a high carbon modification developed for increased creep resistance.

Nickel Alloy 200 Tube to Union Fittings | Nickel Alloy 200 Tube to Union Fittings | Nickel Alloy 200 Tube to Union Fittings | Nickel Alloy 200 Tube to Union Fittings | Nickel Alloy 200 Tube to Union Fittings | Nickel Alloy 200 Tube to Union Fittings | Nickel Alloy 200 Tube to Union Fittings | Nickel Alloy 200 Tube to Union Fittings | Nickel Alloy 200 Tube to Union Fittings | Nickel Alloy 200 Tube to Union Fittings

In most instances the grain size and carbon content of Alloy 200 Union Tube Fittings will meet each of the character necessities. Alloy 200 Ferrule Fittings is commonly used at refrigerant temperatures, with wonderful toughness to -450 Degree F, and low magnetic permeability. For optimum corrosion performance in Alloy 200 Double Ferrule Fittings, therefore, the re – annealing of cold worked parts (following an outer fiber elongation of 7 % or more) is important.

Nickel Alloy 200 Tube to Union Specifications

Standards : ASTM B366 / ASME SB366
Size Range : 1/16″OD to 2″OD, 2mm OD to 50mm OD
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
End : Threaded, Welding, JIC
Pressure Rating : 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting

High Nickel Alloy 200 Tube To Union Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel Alloy 200 Tube To Union Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 200 Nickel Alloy Ferrule Fitting Tube To Union

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

 

High Nickel Alloy 200 Tube To Union Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel Alloy 200 Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Nickel Alloy 200 Tube to Union Fittings

Sachiya Steel International is a Leading Manufacturer And Exporter of Nickel Alloy 200 Tube to Union Fittings to the valued customers. With Nickel 200 Compression Fittings (UNS N02200), the restrictions are combined into a single dual chemistry which results in a single alloy with the best characteristics of both.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
Nickel Alloy 200 Tube to Union Fittings

Sachiya Steel International is a Leading Manufacturer And Exporter of Nickel Alloy 200 Tube to Union Fittings to the valued customers. With Nickel 200 Compression Fittings (UNS N02200), the restrictions are combined into a single dual chemistry which results in a single alloy with the best characteristics of both.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top