Sachiya Steel International is one of the leading Manufacturer and Exporter of Monel Alloy K500 Tube to Union Fittings. When in the age – hardened condition, Monel K500 Compression Fittings (UNS N05500) has a greater tendency toward stress – corrosion cracking in some environments than Monel 400 Compression Fittings. A thoroughly modern alloy, Monel K500 Ferrule Fittings, is a high performance alloy that benefits greatly from double melting through the Electro Slag Refining (ESR) process, which ensures the cleanest and highest quality of material is supplied. Monel K500 Union Fittings is used for sea water pump shafts and impellers as well as being used in the oil well industry for valve trim and other components.
Meanwhile, these Monel K500 Tube Fittings are also being offered in different sizes and shapes to our customers. The resistance of Alloy K500 Tube Fittings in Nitric acid plus hydrofluoric acid mixtures lends itself to pickle shop duties. The substantial chromium content gives Alloy K500 Compression Fittings outstanding resistance to oxidizing chemicals and to high – temperature oxidizing gases.
Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings
Alloy K500 Union Tube Fittings is a basic nickel – chromium alloy for corrosive and / or high temperature applications. The high chromium content makes Alloy K500 Ferrule Fittings very resistant to attack from oxidizing chemicals or hot gases. Alloy K500 Double Ferrule Fittings is a kind of nickel alloy with higher chromium as compared with Alloy 400.
Monel K500 Tube to Union Specifications |
||
| Standards | : | ASTM B366 / ASME SB366 |
| Size Range | : | 1/16″OD to 2″OD, 2mm OD to 50mm OD |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| End |
: | Threaded, Welding, JIC |
| Pressure Rating | : | 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi |
| Type | : | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting |
Monel Alloy K500 Tube To Union Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel K500 | 0.25 max | 1.5 max | 0.5 max | 0.010 max | 27.00 – 33.00 | 0.5 – 2 | 63.00 min |
Monel K500 Tube To Union Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel K500 | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 160000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20 % |
Equivalent Grades for K500 Monel Ferrule Fitting Tube To Union
| STANDARD | WERKSTOFF NR. | UNS |
| Monel K500 | 2.4375 | N05500 |
Monel Alloy K500 Tube To Union Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Monel K500 Tube To Union Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Monel Alloy K500 Tube to Union Fittings
Sachiya Steel International is one of the leading Manufacturer and Exporter of Monel Alloy K500 Tube to Union Fittings. When in the age – hardened condition, Monel K500 Compression Fittings (UNS N05500) has a greater tendency toward stress – corrosion cracking in some environments than Monel 400 Compression Fittings.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5