Titanium Gr 2 Tube to Male Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 2 Tube to Male Fittings, where strong reducing media may cause heavy corrosion. Titanium Grade 2 Tube Fittings has the highest formability, along with the highest strength and moderate formability. Titanium Grade 2 Compression Fittings shares many of the same qualities as Grade 1 titanium, but it is slightly stronger, but both are equally corrosion resistant. Comparable to austenitic stainless steel, the low speed, heavy feed rate and abundant cutting fluid, Employ safety measures of Titanium Grade 2 Ferrule Fittings are excellent because titanium is extremely combustible.

Titanium Gr 2 Tube to Male Fittings
Titanium Gr 2 Tube to Male Fittings

This mixture has a solid solubility which varies dramatically with temperature, allowing Titanium Grade 2 Double Ferrule Fittings to undergo precipitation strengthening. Titanium Grade 2 Male Connector Fittings is alloyed titanium and is considered to be an alpha – beta alloy. Annealing of Grade 2 Titanium Tube Fittings can be performed under high vacuum, under argon after careful purging of the recipient or in air. This combination of properties makes Grade 2 Titanium Compression Fittings a candidate for a large variety of chemical and marine as well as aerospace and medical applications.

Grade 2 Titanium Male Connector Fittings is the most commonly used grade of titanium, where further it has good weldability and is easily formable. Grade 2 Titanium Ferrule Fittings is classified by its corrosion resistance, ductility, and strength, where low cutting speeds, heavy feed rates, sharp tools, and ample cutting fluid are prescribed.

Titanium Gr 2 Tube to Male Fittings Manufacturer In India | Titanium Gr 2 Tube to Male Fittings Manufacturer In Mumbai| Titanium Gr 2 Tube to Male Fittings Exporter In India | Titanium Gr 2 Tube to Male Fittings Exporter In Mumbai | Titanium Gr 2 Tube to Male Fittings Supplier In India| Titanium Gr 2 Tube to Male Fittings Supplier In Mumbai| Titanium Gr 2 Tube to Male Fittings Stockist In India | Titanium Gr 2 Tube to Male Fittings Stockist In Mumbai

Titanium Gr 2 Tube to Male Fittings Specifications

Specifications : ASTM B381 ASME SB381
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B381 ASTM B381
Pressure Rating : 6000PSI for Titanium , 300/1000/3000PSI for Brass

Titanium Alloy Gr 2 Tube To Male Fittings Chemical Composition

Grade Ti C Fe H N O Al V
Ti Grade2 99.2 min 0.1 max 0.3 max 0.015 max 0.03 max 0.25 max

Titanium Gr 2 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 2 4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20 %

Equivalent Grades for Gr 2 Titanium Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS
Titanium Gr. 2 3.7035 R50400

Ti. Alloy Gr 2 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Titanium Gr 2 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Titanium Gr 2 Tube to Male Fittings

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 2 Tube to Male Fittings, where strong reducing media may cause heavy corrosion. Titanium Grade 2 Tube Fittings has the highest formability, along with the highest strength and moderate formability.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published.