Stainless Steel 904L Round Bars Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 904L Round Bars, which is perhaps the most popular non – harden able ferritic stainless steel available. These Stainless Steel 904L Square Bars is known for good corrosion, heat, oxidation resistance, and its decorative nature. It is important to note that when well – polished or buffed, then the corrosion resistance of our Stainless Steel 904L Flat Bars increases. All welding must occur at higher temperatures, but these Stainless Steel 904L Threaded Bars is easily machined, bent, and formed. Our Stainless Steel 904L Hollow Bars is often chosen to solve SCC problems, which may also occur with 316L stainless.

Stainless Steel 904L Round Bars
        Stainless Steel 904L Round Bars
Stainless Steel 904L Round Bars Manufacturer In India | Stainless Steel 904L Round Bars Manufacturer In Mumbai | Stainless Steel 904L Round Bars Exporter In India | Stainless Steel 904L Round Bars Exporter In Mumbai | Stainless Steel 904L Round Bars Supplier In India | Stainless Steel 904L Round Bars Supplier In Mumbai | Stainless Steel 904L Round Bars Stockist In India | Stainless Steel 904L Round Bars Stockist In Mumbai

Meanwhile, these Stainless Steel 904L Hexagonal Bars was designed for maximum resistance to acid attack and demonstrates superior resistance to stress – corrosion cracking in boiling 20 % to 40 % sulphuric acid. Our Stainless Steel 904L Triangular Bars also has excellent general corrosion resistance to sulphuric acid and to chloride stress corrosion cracking.

These Stainless Steel 904L Bars can be used for a wide variety of applications including: control valves, pressure relief valves, and centrifugal pumps. Our Stainless Steel 904L Rods has minimal carbide precipitation during welding & excellent mechanical properties and fabricability is excellent design features. Resistance to sulphuric acid is particularly exceptional, but these 904L Stainless Steel Round Bars shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments.

SS 904L Round Bar Specifications

Specifications : ASTM A276, ASME SA276 / ASTM A479  ASME SA479
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 904L Round Bars
: Outside Diameter in the range of 4mm to 500mm
SS 904L Bright Bars
: Outside Diameter in the range of 4mm to 100mm
SS 904L Hex Bars : 18mm – 57mm (11/16″ to 2-3/4″)
SS 904L Square Bars
: 18mm – 47mm (11/16″ to 1-3/4″)
SS 904L Flat Bars
: 1/2” to 10” in thickness range of 2mm to 150mm,
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

904L Stainless Steel Round Bar Chemical Composition

Grade C Mn Si P S Cr Mo Ni Cu
SS 904L 0.020 max 2 max 1 max 0.040 max 0.030 max 19.0-23.0 4.0-5.0 max 23.00 – 28.00 1.0-2.0

Stainless Steel 904L Rods Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 7.95 g/cm3  1350 °C (2460 °F) Psi – 71000 , MPa – 490 Psi – 32000 , MPa – 220 35%

Equivalent Grades for 904L Stainless Steel Round Bar

STANDARD WERKSTOFF NR. UNS JIS BS KS AFNOR EN
SS 904L 1.4539 N08904 SUS 904L 904S13 STS 317J5L Z2 NCDU 25-20 X1NiCrMoCu25-20-5

SS 904L Round Bar Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

904L Steel Rods Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 904L Round Bars

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 904L Round Bars, which is perhaps the most popular non – harden able ferritic stainless steel available. These Stainless Steel 904L Square Bars is known for good corrosion, heat, oxidation resistance, and its decorative nature. It is important to note that when well – polished or buffed, then the corrosion resistance of our Stainless Steel 904L Flat Bars increases. All welding must occur at higher temperatures, but these Stainless Steel 904L Threaded Bars is easily machined, bent, and formed. Our Stainless Steel 904L Hollow Bars is often chosen to solve SCC problems, which may also occur with 316L stainless.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top