Stainless Steel 410 Threaded Forged Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Threaded Forged Fittings, which display good resistance to scaling in continuous service up to 650 Degree C. Small sections of Stainless Steel 410 Forged Threaded Elbow can be air cooled and larger sections oil quenched for maximum through hardness. Pre hardened and tempered Stainless Steel 410 Forged Threaded Tee will also respond readily to nitriding achieving a typical surface hardness. The nitriding process of Stainless Steel 410 Forged Threaded Cross however reduces the corrosion resistance and is therefore not generally recommended except for critical applications where the benefit outweighs all other considerations.

Stainless Steel 410 Threaded Forged Fittings Manufacturer In India | Stainless Steel 410 Threaded Forged Fittings Manufacturer In Mumbai | Stainless Steel 410 Threaded Forged Fittings Exporter In In India | Stainless Steel 410 Threaded Forged Fittings Exporter In Mumbai | Stainless Steel 410 Threaded Forged Fittings Supplier In India | Stainless Steel 410 Threaded Forged Fittings Supplier In Mumbai | Stainless Steel 410 Threaded Forged Fittings Stockist In India | Stainless Steel 410 Threaded Forged Fittings Stockist In Mumbai

 

Stainless Steel 410 Threaded Forged Fittings
Stainless Steel 410 Threaded Forged Fittings

Stainless Steel 410 Forged Threaded Cap is used for parts requiring a combination of good strength and toughness, plus reasonable corrosion resistance. Use of Stainless Steel 410 Forged Threaded Fittings at higher working temperatures results in a substantial drop in tensile strength and hardness with subsequent increase in ductility.

Stainless Steel 410 Forged Threaded Coupling is not recommended for use at sub – zero temperatures due to a substantial drop in impact properties consistent with most steels other than the austenitic steel types. In the hardened and tempered as supplied condition, Stainless Steel 410 Forged Threaded Union will be more difficult due to the high yield strength which must be taken into account.

Stainless Steel 410 Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings
SS 410 Forged Fittings Chemical Composition

 

Grade C Mn Si P S Cr Mo Ni N
SS 410 0.15 max 1.00 max 1.00 max 0.040 max 0.030 max 11.50 – 13.50 0.75 max
Stainless Steel 410 Threaded Fitting Mechanical Properties

 

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.8 g/cm3 1400 °C (2550 °F) Psi – 65000 , MPa – 450 Psi – 30000 , MPa – 205 20%
Equivalent Grades for 410 Stainless Steel Forged Fittings

 

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 410 1.4006 S41000 SUS 410 410S21 X12Cr13
Stainless Steel 410 Forged Fittings Application Industries

 

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
SS 410 Forged Threaded Fittings Test Certificates

 

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 410 Threaded Forged Fittings

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Threaded Forged Fittings, which display good resistance to scaling in continuous service up to 650 Degree C. Small sections of Stainless Steel 410 Forged Threaded Elbow can be air cooled and larger sections oil quenched for maximum through hardness. Pre hardened and tempered Stainless Steel 410 Forged Threaded Tee will also respond readily to nitriding achieving a typical surface hardness. The nitriding process of Stainless Steel 410 Forged Threaded Cross however reduces the corrosion resistance and is therefore not generally recommended except for critical applications where the benefit outweighs all other considerations.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
Scroll to Top