Stainless Steel 304H Threaded Forged Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 304H Threaded Forged Fittings, which should be heated to 1900 Degree F minimum and water quenched or rapidly cooled by other means. The high Sulphur content of Stainless Steel 304H Forged Threaded Elbow also has a detrimental impact on hot workability. If hot forming is required, once again, Stainless Steel 304H Forged Threaded Tee should be considered as an alternate selection. The cold work hardening rate of Stainless Steel 304H Forged Threaded Cross makes it less machinable than 410 stainless steel, but similar to 304.

Stainless Steel 304H Threaded Forged Fittings Manufacturer In India | Stainless Steel 304H Threaded Forged Fittings Manufacturer In Mumbai | Stainless Steel 304H Threaded Forged Fittings Exporter In India | Stainless Steel 304H Threaded Forged Fittings Exporter In Mumbai | Stainless Steel 304H Threaded Forged Fittings Supplier In India | Stainless Steel 304H Threaded Forged Fittings Supplier In Mumbai | Stainless Steel 304H Threaded Forged Fittings Stockist In India | Stainless Steel 304H Threaded Forged Fittings Stockist In Mumbai 
Stainless Steel 304H Threaded Forged Fittings
Stainless Steel 304H Threaded Forged Fittings

It is common for Stainless Steel 304H Forged Threaded Cap to be dual certified as 317 and 317L when the material meets the lower carbon limit of SS 317L. Avoid working Stainless Steel 304H Forged Threaded Fittings below 1700 Degree F (927 Degree C). For optimum corrosion resistance, a post – work annealing of Stainless Steel 304H Forged Threaded Coupling is recommended.

Stainless Steel 304H Forged Threaded Union may be formed and fabricated through a full range of cold working operations. It can be used in heading, drawing, bending, and upsetting. Any cold working operations of Stainless Steel 304H Forged Threaded Bushing will increase the strength and hardness of the material. Stainless Steel 304H Forged Threaded Plug is a tough austenitic stainless steel subject to work hardening during deformation and is resistant to chip breaking.

Stainless Steel 304H Forged Threaded Fittings Specifications

Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

SS 304H Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 304H 0.10 max 2 max 0.75 max 0.045 max 0.030 max 18 – 20 8 – 10.5

Stainless Steel 304H Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Equivalent Grades for 304H Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304H 1.4301 S30409

Stainless Steel 304H Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 304H Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 304H Threaded Forged Fittings

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 304H Threaded Forged Fittings, which should be heated to 1900 Degree F minimum and water quenched or rapidly cooled by other means. The high Sulphur content of Stainless Steel 304H Forged Threaded Elbow also has a detrimental impact on hot workability. If hot forming is required, once again, Stainless Steel 304H Forged Threaded Tee should be considered as an alternate selection. The cold work hardening rate of Stainless Steel 304H Forged Threaded Cross makes it less machinable than 410 stainless steel, but similar to 304.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
Scroll to Top