Stainless Steel 347H Threaded Forged Fittings

Stainless Steel 347H Threaded Forged Fittings Manufacture

Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 347H Threaded Forged Fittings, which has high corrosion resistance in chloride containing media, including seawater. Our Stainless Steel 347H Forged Threaded Elbow is a machinability – improved version and is well suited for use in, for example, organic acids. These Stainless Steel 347H Forged Threaded Tee offers excellent and consistent machining properties for increased cutting speeds, reduced tool wear and set – up times. Our Stainless Steel 347H Forged Threaded Cross is exposed for prolonged periods to temperatures exceeding 300 Degree C (570 Degree F).

The microstructure of these Stainless Steel 347H Forged Threaded Cap changes which results in a reduction in impact strength, where this effect does not necessarily affect the behavior of the material at the operating temperature. Our Stainless Steel 347H Forged Threaded Fittings has a far lower coefficient of thermal expansion than austenitic alloys and can therefore possess certain design advantages.

Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings | Stainless Steel 347H Threaded Forged Fittings

In terms of resistance to general corrosion, these Stainless Steel 347H Forged Threaded Coupling is comparable or superior alloys in most media. Compared to our Stainless Steel 347H Forged Threaded Union, which does not contain molybdenum, it is clearly far superior. These Stainless Steel 347H Forged Threaded Bushing is confirmed by potential measurements of the critical temperature for the initiation of pitting corrosion (CPT) performed in chloride – bearing aqueous solutions.

 

Stainless Steel 347H Forged Threaded Fittings Specifications

Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

 

SS 347H Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Cb Ni Fe
SS 347H 0.10 max 2 max 1.00 max 0.045 max 0.030 max 17.00 – 19.00 8xC – 1.10 9.00 – 13.00 63.72 min

Stainless Steel 347H Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 347H Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 347H 1.4961 S34709 SUS 347H X6CrNiNb18-12

 

Stainless Steel 347H Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

SS 347H Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

 

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 347H Threaded Forged Fittings

Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 347H Threaded Forged Fittings, which has high corrosion resistance in chloride containing media, including seawater.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published.