Stainless Steel 321 Beam Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 321 Beam, Angle, Channel, Chain, which has some great features to offer such as Accurate dimension, Excellent performance, Long service life, Reasonable price, Low maintenance, Optimality, Ease of fabrication, and so on. The procuring agents employed with us ensure that our experts use only quality raw material for the fabrication of our Stainless Steel 321 Angle.

Stainless Steel 321 Beam Manufacturer In India | Stainless Steel 321 Beam Manufacturer In Mumbai | Stainless Steel 321 Beam Exporter In India | Stainless Steel 321 Beam Exporter In Mumbai | Stainless Steel 321 Beam Supplier In India | Stainless Steel 321 Beam Supplier In Mumbai | Stainless Steel 321 Beam Stockist In Mumbai | Stainless Steel 321 Beam Stockist In India
Stainless Steel 321 Beam
         Stainless Steel 321 Beam

We also offer these in different grades and specifications, where this Stainless Steel 321H C Channel is often used in requiring low tensile strength, components of small cross section, as well as heavy forging in the normalized condition for automotive & general engineering such as presses & Punches Parts, axles, clutch shafts, Piston rods & gear rods. Our Stainless Steel 321 H Beam is widely acclaimed in the industry for their long lasting nature, robust construction, dimensional accuracy, high tensile strength and rust free nature.

We have the widest range of these Stainless Steel 321H I Beam in one roof manufactured under strict quality norms, which are further manufactured using superlative quality raw materials. Moreover, our ability to fulfill emergent of bulk orders of our Stainless Steel 321 T Beam within the specified time has enabled us to serve huge clientele. Due to their number of advantages, this Stainless Steel 321H Chain is acknowledged in various heat – testing equipment’s.

SS 321/321H Angle, Channel, Beam, Chain Specifications

Specifications : ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 321 Angle
: 5mm to 9mm
SS 321 Channel
: 40mm*20mm~300mm*300mm
SS 321 Beam : 3″ thru 12.31″
SS 321 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain

321/321H Stainless Steel Angle, Channel, Beam, Chain Chemical Composition

Grade C Mn Si P S Cr N Ni Ti
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 5(C+N) – 0.70 max
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 4(C+N) – 0.70 max

Stainless Steel 321/321H Angle, Channel, Beam, Chain Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 321/321H Stainless Steel Angle, Channel, Beam, Chain

STANDARD WERKSTOFF NR. UNS JIS EN
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9

SS 321/321H Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

321/321H Steel Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 321 Beam

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 321 Beam, Angle, Channel, Chain, which has some great features to offer such as Accurate dimension, Excellent performance, Long service life, Reasonable price, Low maintenance, Optimality, Ease of fabrication, and so on. The procuring agents employed with us ensure that our experts use only quality raw material for the fabrication of our Stainless Steel 321 Angle.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *