Stainless Steel 317 Channel Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 317 Channel, where high quality of raw materials is used in manufacturing these products. The main requirement for Stainless Steel 317 Angle is that they should be corrosion resistant for a specified application or environment. The selection of a particular Stainless Steel 317 C-Channel must initially meet the corrosion resistance requirements. Stainless Steel 317 H-Beam is austenitic chromium – nickel steels with high strength and excellent corrosion resistance. Stainless Steel 317 I-Beam are used in fluidized bed combustors, kilns, and radiant tubes, tube hangers for petroleum refining and steam boilers, coal gasifier internal components, lead pots, thermowells, refractory anchor bolts, burners.

Stainless Steel 317 Channel Manufacturer In India | Stainless Steel 317 Channel Manufacturer In Mumbai | Stainless Steel 317 Channel Exporter In India | Stainless Steel 317 Channel Exporter In Mumbai | Stainless Steel 317 Channel Supplier In India | Stainless Steel 317 Channel Supplier In Mumbai | Stainless Steel 317 Channel Stockist In India | Stainless Steel 317 Channel Stockist In Mumbai
Stainless Steel 317 Channel
Stainless Steel 317 Channel

Additional mechanical or physical properties of Stainless Steel 317 T-Beam may also need to be considered to achieve the overall service performance requirements. Stainless Steel 317 Chain is extensively used for conveyance of fluids intended processes involving critical high – temperature applications. Our offered 317 Stainless Steel Angle are used in under similar service conditions in heat transfer process equipment like boilers, super heaters, heat exchangers and condensers.

317 Stainless Steel Chain also offers higher creep, stress to rupture and tensile strength at elevated temperatures, in addition to excellent corrosion resistance and strength properties. 317 Stainless Steel C-Channel is offered in varied shapes and sizes and is appreciated for its durability and toughness. These fittings can be customized as per client’s specifications.

SS 317 Angle, Channel, Beam, Chain Specifications

Specifications : ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 317 Angle
: 5mm to 9mm
SS 317 Channel
: 40mm*20mm~300mm*300mm
SS 317 Beam : 3″ thru 12.31″
SS 317 Chain
: 1/8 inch – 1/2 inch Diameter
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain

317 Stainless Steel Angle, Channel, Beam, Chain Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317 0.08 max 2 max 0.75 max 0.045 max 0.030 max 18 – 20 3.0-4.0 11.0-15.0 57.845 min

Stainless Steel 317 Angle, Channel, Beam, Chain Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317 Stainless Steel Angle, Channel, Beam, Chain

SS 317 1.4449 S31700 SUS 317

SS 317 Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

317 Steel Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Leave a Comment

Your email address will not be published. Required fields are marked *