Stainless Steel 317 Buttweld Fittings Manufacturer

Stainless Steel 317 Buttweld Fittings

Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 317 Buttweld Fittings, which has excellent general corrosion resistance and is superior in most environments. Stainless Steel 317 Elbow Butt Weld Pipe Fittings has excellent resistance to localized corrosion including inter – granular, pitting and crevice corrosion, where the CPT is generally at least 35 Degree C. Stainless Steel 317 Reducer is also resistant to chloride stress corrosion cracking (SCC) at temperatures of up to about 150 Degree C.

Stainless Steel 317 Tee Butt Weld Pipe Fittings will often perform well in environments which cause premature failure of austenitic grades. Stainless Steel 317 Cross Butt Weld Pipe Fittings has better resistance to sea water than grade 316. Although stainless steel has good high temperature oxidation resistance, Stainless Steel 317 Bend Butt Weld Pipe Fittings suffer from embrittlement if held for even short times at temperatures above 270 Degree C.

Stainless Steel 317 Buttweld Fittings | Stainless Steel 317 Buttweld Fittings | Stainless Steel 317 Buttweld Fittings | Stainless Steel 317 Buttweld Fittings | Stainless Steel 317 Buttweld Fittings

If embrittled, Stainless Steel 317 Stub End can only be rectified by a full solution annealing treatment. Because of its high strength, Stainless Steel 317 End Cap performs well in abrasion/corrosion conditions. A PRE guaranteed to be at least 40 indicates that Stainless Steel 317 Dish Cap Butt Weld Pipe Fittings has good pitting and crevice corrosion resistance to warm sea water and other high chloride environments.

Stainless Steel 317 Pipe Fittings Specifications

Specifications : ASTM A403 / ASME SA403
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

SS 317 Pipe Fittings Chemical Composition

Grade C Ni Mn P S Cr Si Mo Fe
317 0.08 max 11.00 – 15.00 2 max 0.045 max 0.030 max 18.00 – 20.00 1 max 3.00 – 4.00 57.845 min

Stainless Steel 317 Buttweld Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317 Stainless Steel Pipe Fitting

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
317  1.4449 S31700     SUS 317      –             –                –           –

SS WERKSTOFF NR.1.4449 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 317 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 317 Buttweld Fittings

Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 317 Buttweld Fittings, which has excellent general corrosion resistance and is superior in most environments.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top