Stainless Steel 316 Pipe Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316 Pipe Fittings, which are generally more weldable than the other types. Stainless Steel 316 Compression Pipe Fittings are weldable in thin sections, which require more care than austenitic steels but are now regarded as fully weldable. High temperatures of Stainless Steel 316L Compression Pipe Fittings usually accelerate corrosion rates and therefore indicate a higher grade, whereas low temperatures will require tough austenitic steel. In cold rolled and bright annealed, Stainless Steel 316 Compression Fittings can be used in this condition or as the starting point for polishing or other surface treatment processes e.g. coloring.

Stainless Steel 316 Pipe Fittings Manufacturer In India | Stainless Steel 316 Pipe Fittings Exporter In India| Stainless Steel 316 Pipe Fittings Manufacturer In Mumbai | Stainless Steel 316 Pipe Fittings Exporter In Mumbai | Stainless Steel 316 Pipe Fittings Supplier In India | Stainless Steel 316 Pipe Fittings Supplier In Mumbai | Stainless Steel 316 Pipe Fittings Stockist In India | Stainless Steel 316 Pipe Fittings Stockist In Mumbai
Stainless Steel 316 Pipe Fittings
Stainless Steel 316 Pipe Fittings

Stainless Steel 316L Compression Fittings are the most formable of all the types being able to undergo a high degree of deep drawing or stretch forming. Generally, SS 316 Ferrule Pipe Fittings are not as formable but can still be capable of producing quite intricate shapes. In general, SS 316L Double Ferrule Pipe Fittings are available in all product forms over a wide range of dimensions.

It is a way of allowing melting shops to produce 316 Stainless Steel Ferrule Pipe Fittings more efficiently by restricting the number of different types of steel. The chemical composition and mechanical properties of 316L Stainless Steel Ferrule Pipe Fittings can meet more than one grade within the same standard or across a number of standards.

Stainless Steel 316/316L Pipe Fittings / Accessories Specifications

Specifications : ASTM A182 ASME SA 182
Tube Size : 1/16”OD to 2”OD, 2mm OD to 50mm OD
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass

SS 316/316L Pipe Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
316 min. 16.0 2.0-3.0 10.0
max. 0.035 2.0 0.75 0.045 0.030 18.0 14.0
316L min. 16.0 2.0-3.0 10.0
max. 0.035 2.0 0.75 0.045 0.030 18.0 14.0

Stainless Steel 316/316L Accessories Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
316 515 205 40 95 217
316L 485 170 40 95 217

Equivalent Grades for 316/316L Stainless Steel Pipe Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3

SS 316/316L Pipe Fittings / Accessories Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 316/316L Pipe Fittings / Accessories Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 316 Pipe Fittings

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316 Pipe Fittings, which are generally more weldable than the other types. Stainless Steel 316 Compression Pipe Fittings are weldable in thin sections, which require more care than austenitic steels but are now regarded as fully weldable.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *