Stainless Steel 304H Flanges Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 304H Flanges, which is a steel alloy with a minimum of 10.5 % chromium content by mass. Our Stainless Steel 304H Slip On Flanges is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications. These Stainless Steel 304H Threaded Flanges does not readily corrode, rust or stain with water as ordinary steel does. However, our Stainless Steel 304H Weld Neck Flanges is not fully stain – proof in low – oxygen, high – salinity, or poor air – circulation environments. These Stainless Steel 304H Blind Flanges is used where both the properties of steel and corrosion resistance are required.

Stainless Steel 304H Flanges Manufacturer In India | Stainless Steel 304H Flanges Manufacturer In Mumbai | Stainless Steel 304H Flanges Exporter In India | Stainless Steel 304H Flanges Exporter In Mumbai | Stainless Steel 304H Flanges Supplier In India | Stainless Steel 304H Flanges Supplier In Mumbai | Stainless Steel 304H Flanges Stockist In India | Stainless Steel 304H Flanges Stockist In Mumbai
Stainless Steel 304H Flanges
Stainless Steel 304H Flanges

Our Stainless Steel UNS S30409 Socket Weld Flanges differs from carbon steel by the amount of chromium present. These unprotected Stainless Steel 304H Lap Joint Flanges rusts readily when exposed to air and moisture. Since iron oxide has lower density than these Stainless Steel 304H Ring Joint Type Flanges, the film expands and tends to flake and fall away.

In comparison, our Stainless Steel 304H Spectacle Blind Flanges contain sufficient chromium to undergo passivation, forming an inert film of chromium oxide on the surface. The layer prevents further corrosion by blocking oxygen diffusion to the surface of these Stainless Steel 304H Spacer Flanges and stops corrosion from spreading into the bulk of the metal.

Stainless Steel 304H Pipe Flanges Specifications

Specifications : ASTM A182 / ASME SA182
Size : 1/2″ (15 NB) to 48″ (1200NB)
Standards
: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

SS 304H Pipe Flanges Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 304H 0.10 max 2 max 0.75 max 0.045 max 0.030 max 18 – 20 8 – 10.5

Stainless Steel 304H Plate Flanges Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 304H Stainless Steel Industrial Pipe Flanges

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304H 1.4301 S30409

SS 304H Flanges Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 304H Pipe Flanges Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 304H Flanges

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 304H Flanges, which is a steel alloy with a minimum of 10.5 % chromium content by mass. Our Stainless Steel 304H Slip On Flanges is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications. These Stainless Steel 304H Threaded Flanges does not readily corrode, rust or stain with water as ordinary steel does. However, our Stainless Steel 304H Weld Neck Flanges is not fully stain – proof in low – oxygen, high – salinity, or poor air – circulation environments. These Stainless Steel 304H Blind Flanges is used where both the properties of steel and corrosion resistance are required.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top