SS 316 Threaded Forged Fittings

SS 316 Threaded Forged Fittings Manufacture


Sachiya Steel International is one of the renowned Manufacture and Exporter for SS 316 Threaded Forged Fittings, which is introduced to the Oil and Gas industry when it was selected for natural gas pipelines. In addition, the appropriate Stainless Steel 316 Threaded Forged Elbow for an industrial project can lead to less lifetime maintenance and inspection costs, along with less production downtime costs. In the case of architectural projects, the right Stainless Steel 316L Threaded Forged Tee can hold up to some of the worst environments, and still retain its beauty over time.

This can reduce lifetime painting and cleaning expenditures of Stainless Steel 316 Threaded Forged Cross that may be needed as compared to alternative materials. Furthermore, Stainless Steel 316L Threaded Forged Cap usage contributes to LEED’s certification, which helps increase the value of a project. Finally, at the end of life for a project, Stainless Steel 316 Threaded Forged Fittings has high scrap value.

SS 316 Threaded Forged Fittings | SS 316 Threaded Forged Fittings | SS 316 Threaded Forged Fittings | SS 316 Threaded Forged Fittings | SS 316 Threaded Forged Fittings | SS 316 Threaded Forged Fittings | SS 316 Threaded Forged Fittings  | SS 316 Threaded Forged Fittings | SS 316 Threaded Forged Fittings | SS 316 Threaded Forged Fittings

It is interesting to note that as society and governments are becoming more conscious of environmental and economic factors, the growth in the use of Stainless Steel 316L Threaded Forged Coupling has been the highest of any material in the world. This helps in highlighting a growing amount of awareness of Stainless Steel 316 Threaded Forged Union in regard to how to make responsible decisions when it comes to material selection.


Stainless Steel 316/316L Forged Threaded Fittings Specifications

Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings


SS 316/316L Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 316 0.08 max 2 max 1.00 max 0.045 max 0.030 max 16 – 18 2.0 – 3.0 11 – 14 67.845 min
SS 316L 0.035 max 2 max 1.00 max 0.045 max 0.030 max 16 – 18 2.0 – 3.0 10 – 14 68.89 min

Stainless Steel 316/316L Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 316/316L Stainless Steel Forged Fittings

SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3


Stainless Steel 316/316L Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry


SS 316/316L Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)



Leave a Comment

Your email address will not be published. Required fields are marked *