SMO 254 Pipe Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of quality SMO 254 Pipe Fittings, which gives better guaranteed corrosion resistance. These SMO 254 Compression Pipe Fittings resists chloride environments and sulphide stress corrosion. SMO 254 Compression Fittings is also roughly double the strength of standard austenitic stainless steels. We recommend a maximum hot forming temperature of these SMO 254 Ferrule Pipe Fittings between the range of 2010 Degree F and 2100 Degree F (1100 Degree to 1150 Degree C).

SMO 254 Pipe Fittings
SMO 254 Pipe Fittings

If the shape of the work piece is not compact, the edges of SMO 254 Double Ferrule Pipe Fittings may be significantly cooler than the bulk, and there is risk of cracking in the cooler regions. These SMO 254 Accessories are somewhat more difficult to machine than the 300 series austenitic stainless steels. Higher cutting forces in Alloy 254 Compression Pipe Fittings are required and more rapid tool wear is typical, where the high strength can pose problems.

SMO 254 Pipe Fittings Manufacturer In India | SMO 254 Pipe Fittings Manufacturer In Mumbai | SMO 254 Pipe Fittings Exporter In India | SMO 254 Pipe Fittings Exporter In Mumbai | SMO 254 Pipe Fittings Supplier In India | SMO 254 Pipe Fittings Supplier In Mumbai | SMO 254 Pipe Fittings Stockist In India | SMO 254 Pipe Fittings Stockist In Mumbai 

These Alloy 254 Ferrule Pipe Fittings is not generally suitable for use at temperatures above 300 Degree C as it suffers from precipitation neither of brittle micro constituents, nor below -50 Degree C because of its ductile – to – brittle – transition. Alloy 254 Double Ferrule Pipe Fittings has excellent general corrosion resistance; superior to Grade 316 in most environments. These Alloy 254 Accessories has excellent resistance to localized corrosion including inter – granular, pitting and crevice corrosion.

Alloy 254 Pipe Fittings / Accessories Specifications

Specifications : ASTM A403 ASME SA 182
Tube Size : 1/16”OD to 2”OD, 2mm OD to 50mm OD
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating : 6000PSI for SMO

SMO 254 Pipe Fittings Chemical Composition

Grade C Mn Si Cu S P Mo Ni Cr
SMO 254 0.02 1 0.08 0.5-1.0 0.01 0.03 6.0-6.5 17.5-18.5 19.5-20.5

Alloy 254 Accessories Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8 g/cm3 1320-1390 ℃ 650 300 35 %

Equivalent Grades for 254 SMO Pipe Fittings

STANDARD WERKSTOFF NR. UNS SIS BS GOST AFNOR EN
SMO 254 1.4547 S31254 2378 Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7

SMO 254 Pipe Fittings / Accessories Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 254 Pipe Fittings / Accessories Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

SMO 254 Pipe Fittings

Sachiya Steel International is one of the Leading Manufacturer And Exporter of quality SMO 254 Pipe Fittings, which gives better guaranteed corrosion resistance. These SMO 254 Compression Pipe Fittings resists chloride environments and sulphide stress corrosion. SMO 254 Compression Fittings is also roughly double the strength of standard austenitic stainless steels

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top