Nickel Alloy 200 Round Bar Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Round Bar to the valued clienteles, which is quickly fancied by commonplace industrial procedures. Nickel 200 Square Bars is a commercially unalloyed nickel that displays exceptional corrosion resistance and has pretty low electrical resistivity. Nickel 200 Flat Bars are reinforced wrought materials, and is a commercially pure material that shows excellent corrosion resistance. Meanwhile, these Nickel 200 Threaded Bars are also being offered in different sizes and shapes to our customers.

Nickel Alloy 200 Round Bar Manufacturer In India | Nickel Alloy 200 Round Bar Manufacturer In Mumbai | Nickel Alloy 200 Round Bar Exporter In India | Nickel Alloy 200 Round Bar Exporter In Mumbai | Nickel Alloy 200 Round Bar Supplier In India | Nickel Alloy 200 Round Bar Supplier In Mumbai | Nickel Alloy 200 Round Bar Stockist In India | Nickel Alloy 200 Round Bar Stockist In Mumbai 

 

Nickel Alloy 200 Round Bar
Nickel Alloy 200 Round Bar

Hot forming in Nickel 200 Hollow Bars should be performed within a temperature range between 1600 Degree F and 2250 Degree F (870 Degree C – 1230 Degree C) with heavier sections heated to a minimum of 2000 Degree F before forming. Sachiya Steel International is one of the pioneer supplier and dealer of quality Nickel 200 Hexagonal Bars, which may be welded victimization all of the common attachment processes.

Nickel 200 Triangular Bars is associate solid solution heat resistant alloy with wonderful resistance to oxidization underneath gently cyclic conditions through 2000 Degree F. Alloy 200 Square Bars is compared to steel, where in fact unsullied steels that are harder and have a tendency to figure harden speedily. Alloy 200 Flat Bars is a heat resisting stainless – steel with high resistance to oxidization scaling and has high strength at elevated temperatures. Alloy 200 Threaded Bars is also available in custom made sizes and shapes to our clients at reasonable price.

Nickel 200 Round Bar Specifications
Specifications : ASTM B160  / ASTM SB160
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Size
: 5 mm To 500 mm
Diameter : 0.1 mm to 100 mm
Length : 100 mm To 3000 mm Long & Above
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

200 Nickel Round Bar Chemical Composition

 

Grade C Mn Si Cu S Fe Mo Ni Cr
Nickel 200 0.15 max 0.35 max 0.35 max 0.25 max 0.01 min 0.40 max 99 min

Nickel Alloy 200 Rods Mechanical Properties

 

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.9 g/cm3 1446 °C (2635 °F)  Psi – 67,000 , MPa – 462 Psi – 21,500 , MPa – 148 45 %

Equivalent Grades for 200 Nickel Round Bar

 

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

Nickel 200 Round Bar Application Industries

 

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

200 Nickel Rods Test Certificates

 

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

 

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Nickel Alloy 200 Round Bar

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Round Bar to the valued clienteles, which is quickly fancied by commonplace industrial procedures. Nickel 200 Square Bars is a commercially unalloyed nickel that displays exceptional corrosion resistance and has pretty low electrical resistivity. Nickel 200 Flat Bars are reinforced wrought materials, and is a commercially pure material that shows excellent corrosion resistance. Meanwhile, these Nickel 200 Threaded Bars are also being offered in different sizes and shapes to our customers.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
Scroll to Top