Monel Alloy K500 Round Bar Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Round Bar, where we offer these products to our well – regarded clienteles in a number of designs. Monel K500 Square Bars combines the outstanding corrosion resistance attribute of Monel 400 Bars by means of the additional benefits of greater hardness and strength. Monel K500 Flat Bars is a nickel – copper precipitation – harden able alloy that syndicates corrosion resistance, non – magnetic and high strength properties. Monel K500 Threaded Bars is generally used in doctor blades, scrapers and pump components, cable wrap and oil well drill collars, marine instruments, springs, valve tray, submarine parts and electronic components.

Monel Alloy K500 Round Bar Manufacturer In India | Monel Alloy K500 Round Bar Manufacturer In Mumbai | Monel Alloy K500 Round Bar Exporter In India | Monel Alloy K500 Round Bar Exporter In Mumbai | Monel Alloy K500 Round Bar Supplier In India | Monel Alloy K500 Round Bar Supplier In Mumbai | Monel Alloy K500 Round Bar Stockist In India | Monel Alloy K500 Round Bar Stockist In Mumbai 

 

Monel Alloy K500 Round Bar
        Monel Alloy K500 Round Bar

Monel K500 Hollow Bars (UNS N05500) is effectively nonmagnetic, even at relatively low temperatures. Meanwhile, these Monel K500 Hexagonal Bars are also being offered in different sizes and shapes to our customers. The possession of this resistance to both general and localized corrosion under diverse conditions is what allows Monel K500 Triangular Bars to have a broad usefulness and wide range of applications.

Monel K500 Bars has good mechanical properties from moderately to high temperatures. Monel K500 Rods has good mechanical properties at both room and elevated temperatures up to approximately 1020 Degree F. Aiding resistance to pitting and crevice corrosion is one of the chief benefits of the molybdenum content in Alloy K500 Bars. We also offer these Alloy K500 Rods in customized sizes, shapes and designs to our clients at reasonable cost.

Monel K500 Round Bar Specifications
Specifications : ASTM B865 / ASTM SB865
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Size
: 5 mm To 500 mm
Diameter : 0.1 mm to 100 mm
Length : 100 mm To 3000 mm Long & Above
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

K500 Monel Alloy Round Bar Chemical Composition

 

Grade C Mn Si Cu Fe Ni S
Monel K500 0.25 max 1.5 max 0.5 max 27.00 – 33.00 0.5 – 2 63.00 min 0.010 max

Monel Alloy K500 Rods Mechanical Properties

 

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.44 g/cm3 1350 °C (2460 °F) Psi – 1,60,000 , MPa – 1100 Psi – 1,15000 , MPa – 790 20%

Equivalent Grades for K500 Monel Round Bar

 

STANDARD WERKSTOFF NR. UNS JIS GOST BS AFNOR EN
Monel K500 2.4375 N05500

Monel K500 Round Bar Application Industries

 

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

K500 Monel Rods Test Certificates

 

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

 

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

 

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Monel Alloy K500 Round Bar

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Round Bar, where we offer these products to our well – regarded clienteles in a number of designs. Monel K500 Square Bars combines the outstanding corrosion resistance attribute of Monel 400 Bars by means of the additional benefits of greater hardness and strength. Monel K500 Flat Bars is a nickel – copper precipitation – harden able alloy that syndicates corrosion resistance, non – magnetic and high strength properties. Monel K500 Threaded Bars is generally used in doctor blades, scrapers and pump components, cable wrap and oil well drill collars, marine instruments, springs, valve tray, submarine parts and electronic components.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
Scroll to Top