Monel Alloy K500 Tube to Male Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Tube to Male Fittings, which are mass – produced under the management of our knowledgeable specialists. The finest machinability for this Monel K500 Tube Fittings is in the annealed form. The corrosion resistance of Monel K500 Compression Fittings is considerably corresponding to that of alloy K500, apart from that, when in the age – hard-bitten form, it has a superior propensity to SCC in some atmospheres. Monel K500 Male Connector Fittings is generally used in Chemical Process Industry: such as in procedures connecting organic acids, dry chlorine and caustic soda, manufacture of chlorinated plastics, and so on.

Monel Alloy K500 Tube to Male Fittings
Monel Alloy K500 Tube to Male Fittings

Monel K500 Ferrule Fittings (UNS N05500) has resistant to a sour – gas atmosphere. Meanwhile, these Monel K500 Double Ferrule Fittings are also being offered in different sizes and shapes to our customers. The high chromium content gives Alloy K500 Tube Fittings excellent resistance to aqueous corrosion by oxidizing acids (especially nitric acid) and salts and to suffixation at high – temperatures.

Monel Alloy K500 Tube to Male Fittings Manufacturer In India| Monel Alloy K500 Tube to Male Fittings Manufacturer In Mumbai| Monel Alloy K500 Tube to Male Fittings Exporter In India| Monel Alloy K500 Tube to Male Fittings Exporter In Mumbai | Monel Alloy K500 Tube to Male Fittings Supplier In India| Monel Alloy K500 Tube to Male Fittings Supplier In Mumbai

Alloy K500 Compression Fittings has a superior stress cracking resistance than Monel K500 in steam generation nuclear reactors for piping, separators and weldments. The properties of Alloy K500 Male Connector Fittings are useful for various applications involving nitric or nitric / hydrofluoric acid solutions. These impact strengths (averages from several tests) in Alloy K500 Ferrule Fittings were generated using notch samples, which are machined from plates.

Monel K500 Tube to Male Fittings Specifications

Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Monel, 300/1000/3000PSI for Brass

Monel Alloy K500 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

Monel K500 Tube To Male Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %

Equivalent Grades for K500 Monel Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS
Monel K500 2.4375 N05500

Alloy K500 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Monel K500 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Monel Alloy K500 Tube to Male Fittings

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Tube to Male Fittings, which are mass – produced under the management of our knowledgeable specialists.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top