Inconel 600 Tube to Union Fittings Manufacturer

Inconel 600 Tube to Union Fittings

Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 600 Tube to Union Fittings in various sizes and dimensions, which are perhaps most resistant of all commonly used engineering alloys. Inconel 600 Tube Fittings (UNS N06600) presents the desirable combination of high strength and good weldability under a wide range of temperatures. Inconel 600 Compression Fittings has Good Corrosion Resistance at High Temperatures and shows high levels of resistance to stress – corrosion cracking. The high nickel content of Inconel 600 Double Ferrule Fittings provides exceptional resistance to chloride stress corrosion cracking.

Inconel 600 Ferrule Fittings has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Inconel 600 Compression Tube Fittings has excellent corrosion by high – purity water, along with caustic corrosion. Alloy 600 Tube Fittings does work – harden during machining and has higher strength and “gumminess” not typical of steels. This is because of the high nickel content in Alloy 600 Compression Fittings which provides exceptional resistance at high temperatures.

Inconel 600 Tube to Union Fittings | Inconel 600 Tube to Union Fittings | Inconel 600 Tube to Union Fittings | Inconel 600 Tube to Union Fittings | Inconel 600 Tube to Union Fittings | Inconel 600 Tube to Union Fittings | Inconel 600 Tube to Union Fittings | Inconel 600 Tube to Union Fittings | Inconel 600 Tube to Union Fittings

Because of its versatility, and because it is the standard engineering material for applications which require resistance to corrosion and heat, a number of different critical industries use Alloy 600 Double Ferrule Fittings in their applications. Alloy 600 Ferrule Fittings has good caustic corrosion resistance and resistant to dry Cl2 to about 1000 Degree F. Meanwhile, these Alloy 600 Compression Tube Fittings are also being offered in different sizes and shapes to our customers.

Inconel 600 Tube to Union Specifications

Specifications : ASTM B366 / ASME SB366
Size : 1/16” to 2″ inch
Thread : NPT, BSP, BSPT, IMPRIAL UNF, ISO, SAE, etc.
Pressure Rating
: 3000 – 6000 PSI
PTFE Standards : ASTM 3294, ASTM D1710
Applicable temperature : 150-400°C
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting

Inconel Alloy 600 Tube To Union Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 600 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00

Inconel 600 Tube To Union Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %

Equivalent Grades for 600 Inconel Ferrule Fitting Tube To Union

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe

Inconel Alloy 600 Tube To Union Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Inconel 600 Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top