Sachiya Steel International is leading manufacturer and exporter of Incoloy 825 Tube to Union Fittings, which are made by using quality material. Incoloy 825 Tube Fittings (UNS N08825) is used in temperatures up to 1020 Degrees F. Chemical composition of Incoloy 825 Compression Fittings provides great resistance to a lot of corrosive environments, such as pitting, crevice corrosion, inter – granular corrosion, and stress- corrosion cracking. The levels of molybdenum and copper enable Incoloy 825 Ferrule Fittings to resist reducing agents and acids.

Heavy duty machining equipment and tooling should be used in Incoloy 825 Double Ferrule Fittings to minimize chatter or work – hardening of the alloy ahead of the cutting. Meanwhile, these Incoloy 825 Compression Tube Fittings are also being offered in different sizes and shapes to our customers. Alloy 825 Tube Fittings does work – harden during machining and has higher strength and “gumminess” not typical of steels. The hot- working range for Alloy 825 Compression Fittings is 1600 Degree F to 2150 Degree F.

Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings |Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings

Alloy 825 Ferrule Fittings is used for chemical processing, pollution – control equipment, nuclear fuel reprocessing, oil and gas well piping, acid production, pickling equipment and more. Alloy 825 Double Ferrule Fittings has the pressure vessel authenticate when manufacture temperature up to 450 Degree C. Substantial duty emollients in Alloy 825 Compression Tube Fittings have to be utilized to lessen down the exasperating in all materializing processes.

Incoloy 825 Tube to Union Specifications

Specifications : ASTM B366 / ASME SB366
Size : 1/16” to 2″ inch
Thread : NPT, BSP, BSPT, IMPRIAL UNF, ISO, SAE, etc.
Pressure Rating
: 3000 – 8250 PSI
PTFE Standards : ASTM 3294, ASTM D1710
Applicable temperature : 150-400°C
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting

Incoloy 825 Tube To Union Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
825 0.05 max 1.00 max 0.5 max 0.03 max 1.50 – 3.00 22.00 min 38.00 – 46.00 19.50 – 23.50 0.02 max 0.06 – 1.20

Incoloy 825 Tube To Union Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Equivalent Grades for 825 Incoloy Ferrule Fitting Tube To Union

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT

 

Incoloy Alloy 825 Tube To Union Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 825 Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Incoloy 825 Tube to Union Fittings

Sachiya Steel International is leading manufacturer and exporter of Incoloy 825 Tube to Union Fittings, which are made by using quality material

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5