Sachiya Steel International is one of the leading manufacturer and exporter of Incoloy 800 Tube to Union Fittings, where our offered range is ensured to be in compliance with the international quality standards. Incoloy 800 Compression Tube Fittings (UNS N08800) is extremely functional as it maintains a stable structure, even when exposed to high temperature. Incoloy 800H Compression Tube Fittings (UNS N08810) are resistance to prolonged exposure to elevated temperatures. In power generation, super – heater and re – heater tubing has also employed these Incoloy 800HT Compression Tube Fittings (UNS N08811).

Incoloy 800 Tube Fittings is an iron – nickel – chromium alloy with moderate strength and good resistance to oxidation and carburization at elevated temperatures. Meanwhile, these Incoloy 800HT Tube Fittings are also being offered in different sizes and shapes to our customers. Incoloy 800H Tube Fittings are widely used in heat treatment furnaces, chemical plants and other high – temperature environments. Alloy 800 Compression Tube Fittings has good corrosion resistance in many acidic environments.

Incoloy 800 Tube to Union Fittings | Incoloy 800 Tube to Union Fittings | Incoloy 800 Tube to Union Fittings | Incoloy 800 Tube to Union Fittings | Incoloy 800 Tube to Union Fittings | Incoloy 800 Tube to Union Fittings | Incoloy 800 Tube to Union Fittings | Incoloy 800 Tube to Union Fittings | Incoloy 800 Tube to Union Fittings | Incoloy 800 Tube to Union Fittings

Alloy 800H Compression Tube Fittings is a widely used material for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500 Degree F (816 Degree C). Alloy 800HT Compression Tube Fittings can be supplied in random lengths, cut to order or machined to customer requirements. Inconel 800 Compression Tube Fittings resists oxidizing, reducing and nitriding atmospheres, as well as, atmospheres that alternate between oxidizing and reducing.

Incoloy 800 / 800H/ 800HT Tube to Union Specifications

Specifications : ASTM B366 / ASME SB366
Size : 1/16” to 2″ inch
Thread : NPT, BSP, BSPT, IMPRIAL UNF, ISO, SAE, etc.
Pressure Rating
: 3000 – 8250 PSI
PTFE Standards : ASTM 3294, ASTM D1710
Applicable temperature : 150-400°C
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting

 

Incoloy 800/800H/800HT Tube To Union Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ

Incoloy 800/800H/800HT Tube To Union Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 800/800H/800HT Incoloy Ferrule Fitting Tube To Union

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T

Incoloy Alloy 800/800H/800HT Tube To Union Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 800/800H/800HT Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Incoloy 800 Tube to Union Fittings

Sachiya Steel International is one of the leading manufacturer and exporter of Incoloy 800 Tube to Union Fittings, where our offered range is ensured to be in compliance with the international quality standards.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5