Duplex S31803 Tube to Union Fittings Manufacturer

Duplex S31803 Tube to Union Fittings

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Duplex S31803 Tube to Union Fittings, where our quality controllers inspect these products on certain parameters to rule out every possibility of defect. Our Duplex Steel S31803 Compression Tube Fittings resists sulfide stress corrosion and chloride environments. These Duplex Steel S32205 Compression Tube Fittings are often used in Oil and Gas Industry: such as in Pumps, Valves, Pipe, Vessels, Wellhead Equipment, Subsea Equipment, Separators, Heat Exchangers, etc. Our Duplex Steel S31803 Tube Fittings has better localized corrosion resistance than Type 316L and Type 317L, and the steel is applied in the industrial fields such as chemical plant, seawater desalination plant, seawater pump, and so on.

Meanwhile, these Duplex Steel S32205 Tube Fittings are as well being offered in different sizes and shapes to our customers. These Duplex Steel S31803 Union Fittings is readily weldable using many of the standard electric arc welding processes but oxyacetylene welding is not recommended because carbon pickup in the weld metal may occur.

Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings

The advantage of ouDuplex Steel S32205 Union Fittings is that it combines the favorable qualities of a ferritic alloy (stress corrosion cracking resistance and high strength) with those of an austenitic alloy (ease of fabrication and corrosion resistance). Ganpat Industrial Corporation is one of the prominent trader and dealer of these Duplex Steel S31803 Ferrule Fittings, which is suitable for cold forming.

Duplex Steel S31803 / S32205 Tube to Union Specifications

Specifications : ASTM A182 / ASME SA182
Tube Fittings SIZE : 1/16”OD to 2”OD, 2mm OD to 50mm OD
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
Brass : ASTM B16 ASTM B 453
 Standards : ASTM D1710, ASTM D3294
Applicable Temperature : 150-400°C
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting

 

Duplex Steel S31803 / S32205 Tube To Union Chemical Composition

Grade C Mn Si P S Cr Mo Ni N Fe
S31803 0.030 max 2.00 max 1.00 max 0.030 max 0.020 max 22.0 – 23.0 3.0 – 3.5 4.50 – 6.50 0.14 – 0.20 63.72 min
S32205 0.030 max 2.00 max 1.00 max 0.030 max 0.020 max 21.0 – 23.0 2.50 – 3.50 4.50 – 6.50 0.8 – 0.20 63.54 min

Duplex Steel S31803 / S32205 Tube To Union Mechanical Properties

Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
S31803 / S32205 7.805 0.285 1420 – 1465 2588 – 2669

Equivalent Grades for S31803 / S32205 Duplex Steel Ferrule Fitting Tube To Union

STANDARD WERKSTOFF NR. UNS
Duplex 2205 1.4462 S31803 / S32205

Duplex Steel S31803 / S32205 Tube To Union Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Duplex Steel S31803 / S32205 Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Duplex S31803 Tube to Union Fittings

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Duplex S31803 Tube to Union Fittings, where our quality controllers inspect these products on certain parameters to rule out every possibility of defect.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
Duplex S31803 Tube to Union Fittings

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Duplex S31803 Tube to Union Fittings, where our quality controllers inspect these products on certain parameters to rule out every possibility of defect.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top