Sachiya Steel International is one of the leading Manufacturer and Exporter of Cupro Nickel 90 Tube to Union Fittings, where our offered range is ensured to be in compliance with the international quality standards. Cu-Ni 90 / 10 Tube Fittings (UNS C70600) exhibits superior corrosion resistance in seawater. An addition of iron in Cupro Nickel 90 / 10 Compression Fittings was made to increase its resistance to general corrosion, erosion and impingement corrosion resulting from the turbulent flow of water containing air bubbles and silt flowing at a high velocity. The main, wrought Copper Nickel 90 / 10 Ferrule Fittings chosen for sea water service contain 10 or 30 percent nickel.

Meanwhile, Cu-Ni 90 / 10 Double Ferrule Fittings are also being offered in different sizes and shapes to our customers. For the sake of accuracy, Cupro Nickel 90 / 10 Union Tube Fittings is presented in bold type in the units in which it was originally published with the lighter type equivalents in corresponding units. The addition of manganese, niobium, iron and or chromium in Cu-Ni 90 / 10 Union Tube Fittings improves their corrosion resistance and strength.

Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings

Cu-Ni 90 / 10 Compression Tube Fittings is often used in MARINE, such as for Boat Hulls, Tube Sheet for Salt Water Service, Salt Water Pipe Fittings, Salt Water Piping Systems, Salt Water Piling Wrap, Hot Water Tanks, Salt Water Baffles, Propeller Sleeves, Ship Hulls, and Water Hoses.

Cupro Nickel 90/10 Tube to Union Specifications

Specification : ASTM B122 / ASME SB122
Size Range : 1/16”OD to 2”OD, 2mm OD to 50mm OD
Thread : NPT , BSPT, BSPP
End : Threaded, Welding, JIC
Pressure Rating : 3000 & 6000
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting

Cupro-Nickel 90/10 Tube To Union Chemical Composition

Grade Cu Mn Pb Ni Fe Zn
Cupro Nickel 90/10 88.6 min 1.0 max 0.05 max 9-11 max 1.8 max 1 max

Copper Nickel Alloy 90/10 Tube To Union Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 %

Equivalent Grades for 90/10 Copper Nickel Ferrule Fitting Tube To Union

STANDARD WERKSTOFF NR. UNS
Cupro Nickel 90/10 2.0872 C70600

Cupro-Nickel 90/10 Tube To Union Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Copper Nickel 90/10 Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Cupro Nickel 90 Tube to Union Fittings

Sachiya Steel International is one of the leading Manufacturer and Exporter of Cupro Nickel 90 Tube to Union Fittings, where our offered range is ensured to be in compliance with the international quality standards.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5