Copper Nickel 90 Chain Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Copper Nickel 90 Chain And Other Copper Nickel Products, which has good cold – and hot – working properties and is readily weld able. The reasons are mostly attributed to the composition and production of Cupro Nickel 90 / 10 Angle composites, occurrence of erosion – corrosion and corrosion damage in polluted waters. This information provides a review of the corrosion and befouling resistance of Cupro Nickel 90 / 10 Chain based on laboratory test data and documented experience of the alloy in marine environments.

Copper Nickel 90 Chain Manufacturer In India | Copper Nickel 90 Chain Manufacturer In Mumbai | Copper Nickel 90 Chain Exporter In India | Copper Nickel 90 Chain Exporter In Mumbai | Copper Nickel 90 Chain Supplier In India | Copper Nickel 90 Chain Supplier In Mumbai | Copper Nickel 90 Chain Stockist In India | Copper Nickel 90 Chain Stockist In Mumbai 
Copper Nickel 90 Chain
Copper Nickel 90 Chain

Cupro Nickel 90 / 10 C-Channel are used in forming wires that are typically used for low-temperature applications such as heating cables. The resistance to soil erosion and abrasive fluids of Cupro Nickel 90 / 10 H-Beam is incomparable in the aqueous conditions. Cupro Nickel 90 / 10 I-Beam offers excellent resistance to stress corrosion, erosion, and befouling in seawater and brackish water, excellent fabrication and welding properties, a high resistance to hydrogen embrittlement and the retention of mechanical properties down to cryogenic temperatures.

However, the alloying elements in Cupro Nickel 90 / 10 T-Beam do not become homogenized even by repeated thermal and mechanical treatments. Cu-Ni 90 / 10 Angle ranging in composition are commonly specified in heat exchanger or condenser tubes in a wide variety of marine applications. In addition, Cu-Ni 90 / 10 Chain offers a greater strength for higher pressures.

Cupro Nickel 90/10 Angle, Channel, Beam, Chain Specifications

Specifications : ASTM B151 / ASME SB151
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Cu-Ni 90/10 Angle
: 5mm to 9mm
Cu-Ni 90/10 Channel
: 40mm*20mm~300mm*300mm
Cu-Ni 90/10 Beam : 3″ thru 12.31″
Cu-Ni 90/10 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain

90/10 Cupro Nickel Angle, Channel, Beam, Chain Chemical Composition

Grade Cu Mn Pb Ni Fe Zn
Cu-Ni 90/10 88.6 min 1.0 max 0.05 max 9-11 max 1.8 max 1 max

Cupro Nickel 90/10 Angle, Channel, Beam, Chain Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 %

Equivalent Grades for 90/10 Cupro Nickel Angle, Channel, Beam, Chain

STANDARD WERKSTOFF NR. UNS
Cupro Nickel 90/10 2.0872 C70600

Cupro Nickel 90/10 Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

90/10 Cupro Nickel Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Copper Nickel 90 Chain

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Copper Nickel 90 Chain And Other Copper Nickel Products, which has good cold – and hot – working properties and is readily weld able. The reasons are mostly attributed to the composition and production of Cupro Nickel 90 / 10 Angle composites, occurrence of erosion – corrosion and corrosion damage in polluted waters. This information provides a review of the corrosion and befouling resistance of Cupro Nickel 90 / 10 Chain based on laboratory test data and documented experience of the alloy in marine environments.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top