Brass Pipe Fittings Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Brass Pipe Fittings, which has a high ductile – to – brittle impact transition temperature. Therefore, successful forming and bending of our Brass Compression Pipe Fittings is aided by low forming speeds, edge preparation and preheating to 250 Degree F – 400 Degree F. Annealing of these Brass Compression Fittings, when necessary, have to be performed at 1550 Degree F – 1650 Degree F followed by rapid cool. Welding of our Brass Ferrule Pipe Fittings may be accomplished by conventional methods, where pre – heating and post – heating to 300 Degree F – 600 Degree F is helpful.

Brass Pipe Fittings Manufacturer In India | Brass Pipe Fittings Manufacturer In Mumbai | Brass Pipe Fittings Exporter In India | Brass Pipe Fittings Exporter In Mumbai | Brass Pipe Fittings Supplier In India | Brass Pipe Fittings Supplier In Mumbai | Brass Pipe Fittings Stockist In India | Brass Pipe Fittings Stockist In Mumbai 
Brass Pipe Fittings
     Brass Pipe Fittings

Austenitic weld fillers, such as these Brass Double Ferrule Pipe Fittings are generally suggested to maximize weld deposit ductility. Our Brass Accessories is a Ferritic stainless steel formulated for primary forming into wrought products. This Brass Compression Pipe Fittings is well established, which is typically furnished in the annealed (O) condition. Our Brass Compression Fittings has a moderately high PREN relative to other wrought Ferritic stainless steels in the database.

The lean 11 % nickel content of these Brass Ferrule Pipe Fittings is a key contributor to being cost effective and stable. The dry sliding wear behavior of Brass Double Ferrule Pipe Fittings has been investigated in order to highlight the mechanisms responsible for the poor wear resistance under different applied normal load, sliding speed, and sliding distance conditions.

Carpenter Pipe Fittings / Accessories Specifications

Specifications : ASTM B62 ASME SB 62
Size : 1/8” to 2” and 2mm to 32mm tube diameter
Working Pressure : up to 6,000psi
Dimensions : DIN, ASTM, ASME, BS and all International Standards

Brass Pipe Fittings / Accessories Chemical Composition

Brass Cu Fe Pb Zn
Min./Max. 60.0-63.0 0.35 2.5-3.0 Rem.
Nominal 61.5 2.7 35.4

Brass Pipe Fittings / Accessories Physical Properties

Properties US Customary
Melting Point -Liquidus 1650 F
Melting Point -Solidus 1630 F
Density 0.307 lb/in3at 68 F
Electrical Resistivity 39.90 ohms – cmil/ft @ 68 F
Electrical Conductivity 26 %IACS @ 68 F
Thermal Conductivity 67 Btu · ft/(hr · ft2·oF)at 68F
Modulas of Elasticity in Tension 14000 ksi

Brass Pipe Fittings / Accessories Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Carpenter Pipe Fittings / Accessories Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Brass Pipe Fittings

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Brass Pipe Fittings, which has a high ductile – to – brittle impact transition temperature. Therefore, successful forming and bending of our Brass Compression Pipe Fittings is aided by low forming speeds, edge preparation and preheating to 250 Degree F – 400 Degree F.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top