Sachiya Steel International is one of the prominent dealers and stockiest for high quality Brass Buttweld Pipe Fittings, which is the most widely used stainless steel grade. Brass Elbow Butt Weld Pipe Fittings finds applications due to both excellent corrosion resistance and high strength.

Brass Tee Butt Weld Pipe Fittings gives better guaranteed corrosion resistance, but for much of the stainless steel currently produced also complies with other alloys. Brass Elbow Reducer Butt Weld Pipe Fittings is not generally suitable for use at temperatures above 300 Degree C as it suffers from precipitation neither of brittle micro constituents, nor below -50 Degree C because of its ductile – to – brittle – transition.

 Brass Buttweld Pipe Fittings| Brass Buttweld Pipe Fittings | Brass Buttweld Pipe Fittings | Brass Buttweld Pipe Fittings  | Brass Buttweld Pipe Fittings

Brass Cross Butt Weld Pipe Fittings has excellent general corrosion resistance; superior to Grade 316 in most environments. Brass Bend Pipe Fittings has excellent resistance to localized corrosion including inter – granular, pitting and crevice corrosion; the CPT of it is generally at least 35 Degree C.

Brass Stub End Butt Weld Pipe Fittings is also resistant to chloride stress corrosion cracking (SCC) at temperatures of up to about 150 Degree C. Brass End Cap Butt Weld Pipe Fittings will often perform well in environments which cause premature failure of austenitic grades. Brass Dish Cap Butt Weld Pipe Fittings has better resistance to sea water then Grade 316, where the high strength of can pose problems.

 

Brass Pipe Fittings Specifications

Specifications : ASTM B62 / ASME SB62
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
: ASME/ANSI B16.15, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

 

Brass Buttweld Fittings Chemical Composition

Brass Cu Fe Pb Zn
Min./Max. 60.0-63.0 0.35 2.5-3.0 Rem.
Nominal 61.5 2.7 35.4

Brass Buttweld Fittings Physical Properties

Properties US Customary
Melting Point -Liquidus 1650 F
Melting Point -Solidus 1630 F
Density 0.307 lb/in3at 68 F
Electrical Resistivity 39.90 ohms – cmil/ft @ 68 F
Electrical Conductivity 26 %IACS @ 68 F
Thermal Conductivity 67 Btu · ft/(hr · ft2·oF)at 68F
Modulas of Elasticity in Tension 14000 ksi

 

Brass Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

Brass Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

 

 

Brass Buttweld Pipe Fittings

Sachiya Steel International is one of the prominent dealers and stockiest for high quality Brass Buttweld Pipe Fittings, which is the most widely used stainless steel grade.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5