AISI 4130 Steel Beam Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality AISI 4130 Steel Beam, Angle, Channel, Chain, which has excellent quality that the possibility of designing thinner walls can save cost. Often referred to as an excellent grade due to the molybdenum content, AISI 4130 Angle has the ability to withstand high temperatures and maintain strength under volatile conditions. Commonly used as a replacement in critical components of larger constructions where SS 316L or SS 317L has failed by pitting or chloride stress corrosion cracking, AISI 4130 C-Channel withstands the same corrosive environments.

AISI 4130 Steel Beam Manufacturer In India | AISI 4130 Steel Beam Manufacturer In Mumbai | AISI 4130 Steel Beam Exporter In India | AISI 4130 Steel Beam Exporter In Mumbai | AISI 4130 Steel Beam Supplier In India | AISI 4130 Steel Beam Supplier In Mumbai | AISI 4130 Steel Beam Stockist In India | AISI 4130 Steel Beam Stockist In Mumbai
AISI 4130 Steel Beam
               AISI 4130 Steel Beam

In new construction, AISI 4130 Chain has been found in many cases to be a technically adequate and more cost efficient substitute for other nickel based alloys and titanium, where the allowable design values may be about 50 % higher than those for standard austenitic steels. AISI 4130 I-Beam is often considered a “high end” austenitic stainless, which is further readily fabricated and welded. AISI 4130 H-Beam offers chloride resistance superior to that of other alloys and is especially suited for high chloride environments such as brackish water or seawater.

AISI 4130 T-Beam is an austenitic stainless steel, compatible with the common austenitic stainless steels, designed with high levels of chromium, molybdenum, and nitrogen for maximum resistance to pitting and crevice corrosion. Offered to client’s at the most reasonable rate possible, the offered range of AISI 4130 Steel Angle is known to have a high preference in the market.

AISI 4130 Angle, Channel, Beam, Chain Specifications

Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
AISI 4130 Angle
: 5mm to 9mm
AISI 4130 Channel
: 40mm*20mm~300mm*300mm
AISI 4130 Beam : 3″ thru 12.31″
AISI 4130 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain

4130 AISI Angle, Channel, Beam, Chain Chemical Composition

Grade C Mn Si P S Fe Mo Ni Cr
AISI 4130  0.28-0.33  0.40-0.60  0.15-0.35 0.035 max 0.025 MAX  97.3-98.22  0.15-0.25 0.50 max 0.80-1.10

AISI 4130 Angle, Channel, Beam, Chain Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 7.85 g/cm3  1432 ℃  560 460 21.50%

Equivalent Grades for 4130 AISI Angle, Channel, Beam, Chain

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
AISI 4130 1.7218 G41300 JIS G4105 BS 970 25CrMo4

AISI 4130 Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

4130 AISI  Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

AISI 4130 Steel Beam

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality AISI 4130 Steel Beam, Angle, Channel, Chain, which has excellent quality that the possibility of designing thinner walls can save cost. Often referred to as an excellent grade due to the molybdenum content, AISI 4130 Angle has the ability to withstand high temperatures and maintain strength under volatile conditions

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top