Titanium Grade 2 Hydraulic Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Titanium Grade 2 Hydraulic Fittings. There are two different kinds of hydraulic hose fittings: permanent and reusable. In the fluid power business, permanent or crimped hydraulic fittings are frequently utilized because they are quicker and easier to install than reusable fittings. Moreover, crimped fittings are more dependable. You will require crimping or swaging equipment in order to attach a crimped fitting. When the hose assembly fails, these fittings are pressed onto the hose and are then thrown away.

Titanium Grade 2 Hydraulic Fittings Manufacturer In India | Titanium Grade 2 Hydraulic Fittings Manufacturer In Mumbai | Titanium Grade 2 Hydraulic Fittings Exporter In India | Titanium Grade 2 Hydraulic Fittings Exporter In Mumbai | Titanium Grade 2 Hydraulic Fittings Supplier In India | Titanium Grade 2 Hydraulic Fittings Supplier In Mumbai | Titanium Grade 2 Hydraulic Fittings Stockist In India | Titanium Grade 2 Hydraulic Fittings Stockist In Mumbai

 

Titanium Grade 2 Hydraulic Fittings
Titanium Grade 2 Hydraulic                       Fittings

As for its moderate strength, superior corrosion resistance, and formability, titanium Grade 2 is the most popular titanium alloy utilized in all product forms for industrial service. It is also pure alpha titanium. Grade 2 is somewhat more brittle than Grade 3, but stronger than Grade 1, and equally resistant to corrosion when compared to the other commercially pure titanium grades. Grade 2 provides a superb balance of adequate ductility and moderate strength.

There is excellent weldability in grade 2. The microstructure of the alpha phase is not significantly impacted by thermal treatments or welding temperatures because it is essentially a single-phase material. As a result, a successfully welded junction has mechanical properties that are equivalent to or better than those of the parent metal and exhibit good ductility. These characteristics of titanium grade 2 make Titanium Grade 2 Hydraulic Fittings incredibly useful.

Moreover, this substance is non-magnetic. In chemical processes (it can be used in oxidizing media, alkaline media, organic acids and compounds, aqueous salt solutions, and hot gases); offshore industries (it is fully resistant to corrosion in seawater at temperatures up to 300°C); in the construction of aircraft where a certain level of strength and ease of formability is desired; in heat exchangers, hypochlorite systems, fire water systems, ballast water systems, pumps, and cryogenic vessels.

Titanium Gr.2 Hydraulic Fittings Specifications
Standards : ASTM B381 / ASME SB381
Size Range : 1/16″OD to 2″OD, 2mm OD to 50mm OD
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
End : Threaded, Welding, JIC
Pressure Rating : 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting
Titanium Gr.2 Hydraulic Fittings Chemical Composition

 

Grade Ti C Fe H N O Al V
Ti Grade2 99.2 min 0.1 max 0.3 max 0.015 max 0.03 max 0.25 max
Titanium Alloy Grade 2 Hydraulic Fittings Mechanical Properties

 

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 2 4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20 %
Equivalent Grades for Ti Alloy Gr2 Hydraulic Tube Fittings

 

STANDARD WERKSTOFF NR. UNS
Titanium Gr. 2 3.7035 R50400
Titanium Alloy Grade 2 Hydraulic Fittings Application Industries

 

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Titanium Gr.2 Hydraulic Tube Fittings Test Certificates

 

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

 

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

 

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Titanium Grade 2 Hydraulic Fittings

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Titanium Grade 2 Hydraulic Fittings. There are two different kinds of hydraulic hose fittings: permanent and reusable. In the fluid power business, permanent or crimped hydraulic fittings are frequently utilized because they are quicker and easier to install than reusable fittings. Moreover, crimped fittings are more dependable. You will require crimping or swaging equipment in order to attach a crimped fitting. When the hose assembly fails, these fittings are pressed onto the hose and are then thrown away.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
Scroll to Top