Stainless Steel 310 Hydraulic Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Hydraulic Fittings, which is solidified in continuous casting processes. The most widely used of which feeds Stainless Steel 310 Hydraulic Fittings continuously into short, water – cooled vertical copper mould and, at the same time, continuously withdraws the frozen shell, including the liquid steel it contains. Even in a narrow range of concentrations of mixtures of carbon and iron that make Stainless Steel 310S Hydraulic Fittings, a number of different metallurgical structures, with very different properties can form.

Stainless Steel 310 Hydraulic Fittings Manufacturer In India | Stainless Steel 310 Hydraulic Fittings Manufacturer In Mumbai | Stainless Steel 310 Hydraulic Fittings Exporter In India | Stainless Steel 310 Hydraulic Fittings Exporter In Mumbai | Stainless Steel 310 Hydraulic Fittings Supplier In India | Stainless Steel 310 Hydraulic Fittings Supplier In Mumbai | Stainless Steel 310 Hydraulic Fittings Stockist In India | Stainless Steel 310 Hydraulic Fittings Stockist In Mumbai 

 

Stainless Steel 310 Hydraulic Fittings
Stainless Steel 310 Hydraulic                           Fittings

Understanding such properties is essential to making quality steel, which permits the furnaces to run with a cheaper acid lining. If quenching is done improperly, the internal stresses in Stainless Steel 310 Forged Hydraulic Fittings can cause a part to shatter as it cools. At the very least, Stainless Steel 310S Forged Hydraulic Fittings cause internal work hardening and other microscopic imperfections. Stainless Steel 310 Hydraulic Type Fittings is common for quench cracks to form when steel is water quenched, although they may not always be visible.

Foundries that cast Stainless Steel 310S Hydraulic Type Fittings into commercial products mainly employ coreless induction furnaces or electric – arc furnaces for melting scrap. SS 310 Hydraulic Fittings quality is normally high because a large portion of return scrap is used in the form of gates and risers left over from previous casting operations.

Stainless Steel 310/310S Hydraulic Fittings Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
SS 310/310S Hydraulic Fittings Chemical Composition

 

Grade C Mn Si P S Cr Mo Ni N
SS 310 0.015 max 2 max 0.015 max 0.020 max 0.015 max 24.00 – 26.00 0.10 max 19.00 – 21.00 54.7 min
SS 310S 0.08 max 2 max 1.00 max 0.045 max 0.030 max 24.00 – 26.00 0.75 max 19.00 – 21.00 53.095 min
Stainless Steel 310/310S Hydraulic Fittings Mechanical Properties

 

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %
Equivalent Grades for 310/310S Stainless Steel Hydraulic Tube Fittings

 

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 X8CrNi25-21
SS 310/310S Hydraulic Fittings Application Industries

 

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Stainless Steel 310/310S Hydraulic Tube Fittings Test Certificates

 

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

 

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

 

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 310 Hydraulic Fittings

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Hydraulic Fittings, which is solidified in continuous casting processes. The most widely used of which feeds Stainless Steel 310 Hydraulic Fittings continuously into short, water – cooled vertical copper mould and, at the same time, continuously withdraws the frozen shell, including the liquid steel it contains. Even in a narrow range of concentrations of mixtures of carbon and iron that make Stainless Steel 310S Hydraulic Fittings, a number of different metallurgical structures, with very different properties can form.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
Scroll to Top