Stainless Steel 304L Nipple Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 304L Nipple, which are used because they are not sensitive to inter – granular corrosion after heating within the carbide precipitation range of 425 Degree C – 850 Degree C. A limitation with Stainless Steel 304L Hexagon Reducing Nipple is that titanium does not transfer well across a high temperature arc, so is not recommended as a welding consumable. In general, Stainless Steel 304L Hexagon Nipple is referred as alloy steel when content of Manganese – 1.65 %, Silicon – 0.6 % & copper 0.6 % exceeds the limit.

Stainless Steel 304L Nipple Manufacturer In India | Stainless Steel 304L Nipple Manufacturer In Mumbai | Stainless Steel 304L Nipple Exporter In India | Stainless Steel 304L Nipple Exporter In Mumbai | Stainless Steel 304L Nipple Supplier In India | Stainless Steel 304L Nipple Supplier In Mumbai | Stainless Steel 304L Nipple Stockist In India | Stainless Steel 304L Nipple Stockist In Mumbai 

 

Stainless Steel 304L Nipple
         Stainless Steel 304L Nipple

Stainless Steel 304L One End Threaded Nipple is the grade of choice for applications in the temperature range of up to about 900 Degree C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion. Elements with a lower percentage i.e. less than 5 % are added to increase the strength and harden ability of SS 304L Both End Threaded Nipple, whereas in larger percentage to achieve special properties like corrosion resistance, high temperature sustainability, and high yield and impact results.

Stainless Steel 304L Concentric Swaged Nipple is heat resistant, titanium stabilized, austenitic alloy that’s commonly used for service in the 1000 Degree F – 1600 Degree F temperature range. SS 304L Eccentric Swaged Nipple is primarily used in applications that involve continuous and intermittent service temperatures within the carbide precipitation range of 800 Degree F – 1500 Degree F.

Stainless Steel 304L Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
SS 304L Nipple Chemical Composition

 

Grade C Mn Si P S Cr Mo Ni N
304L min. 18.0 8.00
max. 0.030 2.0 0.75 0.045 0.030 20.0 12.00 0.10
Stainless Steel 304L Nipple Mechanical Properties

 

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304L 485 170 40 92 201
Equivalent Grades for 304L Stainless Steel Nipple

 

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304L S30403 304S31 58E 1.4306 / 1.4307 X5CrNi18-10 2332 SUS 304L
Stainless Steel 304L Nipple Application Industries

 

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
SS 304L Nipple Test Certificates

 

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

 

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

 

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 304L Nipple

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 304L Nipple, which are used because they are not sensitive to inter – granular corrosion after heating within the carbide precipitation range of 425 Degree C – 850 Degree C. A limitation with Stainless Steel 304L Hexagon Reducing Nipple is that titanium does not transfer well across a high temperature arc, so is not recommended as a welding consumable. In general, Stainless Steel 304L Hexagon Nipple is referred as alloy steel when content of Manganese – 1.65 %, Silicon – 0.6 % & copper 0.6 % exceeds the limit.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5