Nickel Alloy 200 Flanges Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Flanges, which has some excellent quality of features such as fine finish, durable, dimensionally stable, and more. Nickel 200 Slip On Flanges (UNS N02200) offer corrosion resistance in reducing and neutral media as well as in oxidizing atmospheres provided that the oxidizing media allows the formation of a passive oxide film. Because the alloy displays good corrosion resistance, Nickel 200 Threaded Flanges has been used in food handling equipment, caustic solution, and general corrosion-resistant parts and structures.

Nickel Alloy 200 Flanges Manufacturer In India | Nickel Alloy 200 Flanges Manufacturer In Mumbai | Nickel Alloy 200 Flanges Exporter In India | Nickel Alloy 200 Flanges Exporter In Mumbai | Nickel Alloy 200 Flanges Supplier In India | Nickel Alloy 200 Flanges Supplier In Mumbai | Nickel Alloy 200 Flanges Stockist In India | Nickel Alloy 200 Flanges Stockist In Mumbai
Nickel Alloy 200 Flanges
Nickel Alloy 200 Flanges

Nickel 200 Weld Neck Flanges has a low annealed hardness and very low work – hardening rate that is desirable for cold forming operations such as deep drawing, spinning, coining, etc. Meanwhile, these Nickel 200 Blind Flanges are also being offered in different sizes and shapes to our customers. Nickel 200 Socket Weld Flanges brings a new dimension to the well-known versatility of Ni – Cr – Mo alloys in resisting corrosion under widely varying conditions. Nickel 200 Lap Joint Flanges combines outstanding resistance to oxidizing media with superior resistance to reducing environments.

Nickel 200 Ring Joint Type Flanges has pitting and crevice corrosion resistance superior to other alloys and resistance to H2SO4 up to 65 %. Nickel 200 Spectacle Blind Flanges resist all acids (especially hydrochloric, sulfuric, and hydrofluoric) over large temperature ranges. Nickel 200 Nippon Flanges also resist the insidious types of attack induced by chlorides and other halide solutions, specifically pitting, crevice attack, and stress corrosion cracking.

Nickel 200 Pipe Flanges Specifications

Specifications : ASTM B564 / ASME SB564
Size : 1/2″NB TO 60″NB
: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

Nickel Alloy 200 Pipe Flanges Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel 200 Plate Flanges Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 200 Nickel Alloy Industrial Pipe Flanges

Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

Nickel Alloy 200 Flanges Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel 200 Pipe Flanges Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)


Leave a Comment

Your email address will not be published. Required fields are marked *