Monel Alloy 400 Round Bar Manufacturer

Sachiya Steel International Is one Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Round Bar, where in a way to achieve comprehensive customer satisfaction, we timely supply the deliveries from our end by means of the assistance of our extensive distribution network. Monel 400 Square Bars is recognized for its superior potency and corrosion resistant properties. Monel 400 Flat Bars is also a nickel – copper solid – solution alloy that is resistant to corrosion in a lot of atmospheres. Monel 400 Threaded Bars is a nickel – copper alloy by means of superior potency and outstanding corrosion resistance in a variety of media comprising hydrofluoric acid, sea water, alkalis and sulfuric acid.

Monel Alloy 400 Round Bar Manufacturer In India | Monel Alloy 400 Round Bar Manufacturer In Mumbai | Monel Alloy 400 Round Bar Exporter In India | Monel Alloy 400 Round Bar Exporter In Mumbai | Monel Alloy 400 Round Bar Supplier In India | Monel Alloy 400 Round Bar Supplier In Mumbai | Monel Alloy 400 Round Bar Stockist In India |Monel Alloy 400 Round Bar Stockist In Mumbai 
Monel Alloy 400 Round Bar
  Monel Alloy 400 Round Bar

Monel 400 Hollow Bars (UNS N04400) is resistant to sea water corrosion in addition to a range of acids and other corrosive media. Meanwhile, these Monel 400 Hexagonal Bars are also being offered in different sizes and shapes to our customers. Monel 400 Triangular Bars does not undergo a ductile – to – brittle transition even when cooled to the temperature of liquid hydrogen.

Monel 400 Bars is in marked contrast to many ferrous materials which are brittle at low temperatures despite their increased strength. Monel 400 Rods is notable for its toughness, which is maintained over a considerable range of temperatures. Both cold – worked and hot – worked Alloy 400 Bars requires thermal treatment to develop the optimum combination of strength and ductility and to minimize distortion during subsequent machining.

Monel 400 Round Bar Specifications

Specifications : ASTM B164 / ASTM SB164
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
: 5 mm To 500 mm
Diameter : 0.1 mm to 100 mm
Length : 100 mm To 3000 mm Long & Above
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

400 Monel Alloy Round Bar Chemical Composition

Grade C Mn Si Cu Fe Ni S
Monel 400 0.30 max 2.00 max  0.50 max 28.00 – 34.00  2.50 max 63.00 min 0.024 max

Monel Alloy 400 Rods Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35000 , MPa – 240 40%

Equivalent Grades for 400 Monel Round Bar

Monel 400 2.4360 N04400 NW 4400 МНЖМц 28-2,5-1,5  NA 13 NU-30M NiCu30Fe

Monel 400 Round Bar Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

400 Monel Rods Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)