Inconel 601 Round Bars Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel 601 Round Bars, which is a Nickel – Chromium alloy that offers good heat and corrosion resistance. The weld fillers developed for RA 602 can also provide a weld which is stronger and more oxidation resistant than Inconel 601 Square Bars base metal. Inconel 601 Flat Bars is a solid solution nickel chromium alloy for high temperature heat resistance. Inconel 601 Threaded Bars is either annealed at around 2000 Degree F or solution treated at around 2100 Degree F, both followed by air cooling. Chemical – processing applications for Inconel 601 Hollow Bars include process heaters, condenser tubes in sour – water strippers, and insulating cans in ammonia reformers.

Inconel 601 Round Bars Manufacturer In India | Inconel 601 Round Bars Manufacturer In Mumbai | Inconel 601 Round Bars Exporter In India | Inconel 601 Round Bars Exporter In Mumbai | Inconel 601 Round Bars Supplier In India | Inconel 601 Round Bars Supplier In Mumbai | Inconel 601 Round Bars Stockist In India | Inconel 601 Round Bars Stockist In Mumbai 


Inconel 601 Round Bars
         Inconel 601 Round Bars

Thanks to this unique composition, Inconel 601 Hexagonal Bars is popular in a number of major global industries including: Pollution control, Power generation and Aerospace. Inconel 601 Triangular Bars is a Nickel – Chromium – iron corrosion and heat resistant alloy, which is often used for insulating cans in ammonia reformers and catalyst support grids used in nitric acid production.

High – speed operations such as grinding, turning or milling, are performed in Inconel 601 Bars using water – based coolants. Inconel 601 Rods is a general – purpose engineering material for applications that require resistance to heat and corrosion. In addition, the weld products developed for RA 602 can provide a stronger weld with higher oxidation resistant than Inconel 601 Rods.

Inconel 601 Round Bar Specifications
Specifications : ASTM B166 / ASTM SB166
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
: 5 mm To 500 mm
Diameter : 0.1 mm to 100 mm
Length : 100 mm To 3000 mm Long & Above
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

601 Inconel Round Bar Chemical Composition


Grade C Mn Si Cu S Fe Mo Ni Cr
Inconel 601 0.10 max 1 max 0.50 max 1 max 0.15 min balance 58.0-63.0 21.0–25.0

Inconel Alloy 601 Rods Mechanical Properties


Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.1 g/cm3 1411 °C (2571 °F)  Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 601 Inconel Round Bar


Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe

Inconel 601 Round Bar Application Industries


  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

601 Inconel Rods Test Certificates


We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing


We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test



• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)