Inconel 601 Hydraulic Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel 601 Hydraulic Fittings, which has some excellent features such as corrosion resistant, fine finishing, easy to fit and so on. Inconel 601 Hydraulic Forged Fittings develops a firmly adherent oxide scale that resists spalling as well under circumstances of strict thermal cycling. For supreme oxidation resistance, Inconel 601 Forged Hydraulic Fittings must be welded by means of similar composition of GTAW wire.

Inconel 601 Hydraulic Fittings Manufacturer In India | Inconel 601 Hydraulic Fittings Manufacturer In Mumbai | Inconel 601 Hydraulic Fittings Exporter In India | Inconel 601 Hydraulic Fittings Exporter In Mumbai | Inconel 601 Hydraulic Fittings Supplier In India | Inconel 601 Hydraulic Fittings Supplier In Mumbai | Inconel 601 Hydraulic Fittings Stockist In India | Inconel 601 Hydraulic Fittings Stockist In Mumbai

 

Inconel 601 Hydraulic Fittings
Inconel 601 Hydraulic Fittings

Some of the outstanding properties of Inconel 601 Hydraulic Type Fittings that fetch users to but this product include: excellent aqueous corrosion resistance, exceptional mechanical strength, and so on. Inconel UNS N06601 Hydraulic Fittings is used in Strand annealing tubes, Radiant tubes, Steam super-heater tube backings, and so on. Alloy 601 Hydraulic Forged Fittings is formed by using all conventional methods and develops a tightly adherent oxide scale which resists spalling even under severe thermal cycling.

Alloy 601 Forged Hydraulic Fittings has excellent resistance to oxidation in the 1000 degree to 1200 degree Centigrade temperature range and also has good corrosion resistance to many acid and aqueous salt solutions. Alloy 601 Hydraulic Type Fittings is often used for petrochemical processing such as in Air preheaters and Catalyst regenerators. Nickel-Alloy 601 Hydraulic Fittings offers adequate resistance to heat and corrosion due to oxidation and other media at the high temperature limits. Meanwhile, these Nickel-Alloy 601 Forged Hydraulic Fittings are also being offered in different sizes and shapes to our customers.

Inconel 601 Hydraulic Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : 1/16” to 2″ inch
Thread : NPT, BSP, BSPT, IMPRIAL UNF, ISO, SAE, etc.
Pressure Rating
: 3000 – 6000 PSI
PTFE Standards : ASTM 3294, ASTM D1710
Applicable temperature : 150-400°C
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting
Inconel 601 Hydraulic Fittings Chemical Composition

 

Grade C Mn Si S Cu Fe Ni Cr
Inconel 601 0.10 max 1.00 max 0.50 max 0.015max 1.00 max Balance 58.0 – 63.0 21.0 – 25.0
Inconel Alloy 601 Hydraulic Fittings Mechanical Properties

 

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %
Equivalent Grades for Alloy 601 Hydraulic Tube Fittings

 

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe
Inconel Alloy 601 Hydraulic Fittings Application Industries

 

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Inconel 601 Hydraulic Tube Fittings Test Certificates

 

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

 

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

 

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Inconel 601 Hydraulic Fittings

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel 601 Hydraulic Fittings, which has some excellent features such as corrosion resistant, fine finishing, easy to fit and so on. Inconel 601 Hydraulic Forged Fittings develops a firmly adherent oxide scale that resists spalling as well under circumstances of strict thermal cycling. For supreme oxidation resistance, Inconel 601 Forged Hydraulic Fittings must be welded by means of similar composition of GTAW wire.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
Scroll to Top