Inconel 600 Outlet Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel 600 Outlet. Our Inconel 600 Nipple Outlet Fittings can be used in environments as cold as cryogenics and as hot as 2,000 degrees Fahrenheit. We offer Alloy 600 Outlet Fittings at the best lowest prices in the industry. Inconel 600 outlet fittings can also be roll-threaded without affecting the grain size after full age by utilizing induction heat to 1,300 degrees Fahrenheit (704 degrees Celsius). Extreme environments frequently contain Inconel 600 Outlet Fittings because of their resistance to oxidation at high temperatures.

Inconel 600 Outlet Manufacturer In India | Inconel 600 Outlet Manufacturer In Mumbai | Inconel 600 Outlet Exporter In India | Inconel 600 Outlet Exporter In Mumbai | Inconel 600 Outlet Supplier In India | Inconel 600 Outlet Supplier In Mumbai | Inconel 600 Outlet Stockist In India | Inconel 600 Outlet Stockist In Mumbai

 

Inconel 600 Outlet
                   Inconel 600 Outlet

When better performance or strength at high temperatures is required, Inconel 600 Olets Pipe Fittings are a first-choice upgrade over 300 series stainless steel, even though normal machining methods for iron-based alloys may be employed. Heat conductivity cannot hard-bite these Inconel 600 Olet Fittings. Sockolet Fittings made of Inconel 600 exhibit extreme degrees of noticeable corrosion. Inconel 600 Welding Outlet Fittings are frequently utilized in extremely hot static applications. These Inconel 600 Socket Weld Outlet Fittings have a high nickel content, which enables them to maintain significant resistance in extremely corrosive situations.

Our Inconel 600 Sockolet Fittings exhibit no signs of stress or aging corrosion throughout the range of conditions from reinforced to extremely cold working. As well as being used in food and chemical processing units, furnace parts, and these Inconel 600 Threading Outlet Fittings (UNS N06600). The heat treating industry has long utilized our Inconel 600 Flexible Outlet Fittings for many of the same applications as RA330. These Inconel 600 Flexolet Fittings provide good resistance to alkaline solutions as well as to chloride, ion stress, corrosion, and cracking due to the nickel content. Our Inconel 600 Sweepolet Fittings are frequently used in the manufacture of hangers, mufflers, fuel stabilizers, furnace trays, and other products. Barge and tank truck liners are two examples of common uses for these Inconel 600 Nippolet Fittings.

Inconel 600 Outlet
Specifications : ASTM B366 / ASTM SB 366
Size : 1/8”-4”
Pressure class : 3000/6000/9000LBS (Sch40, Sch80/Xs Sch160 Xxs)
Type : Threading outlet, Lateral Outlets, Welding Outlets, Sockt Weld Outlets, Nipple Outlets, Sweep outlets.
Inconel 600 Outlet Chemical Composition

 

Grade C Mn Si Fe S Cr Cu Ni
600 min. 6.0 14.0 72.0
max. 0.15 1.0 0.5 10.0 0.015 17.0 0.5
Alloy 600 Olet Mechanical Properties

 

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
600 Psi – 95,000 , MPa -655 Psi – 45,000 , MPa – 310 40
Equivalent Grades for 600 Inconel Outlets

 

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 600 N06600 NA 13 NiCr15Fe 2.4816 NC15FE11M МНЖМц 28-2,5-1,5 NCF 600
Inconel Outlet /Olet Application Industries

 

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Alloy 600 Outlet Test Certificates

 

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

 

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

 

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Inconel 600 Outlet

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel 600 Outlet. Our Inconel 600 Nipple Outlet Fittings can be used in environments as cold as cryogenics and as hot as 2,000 degrees Fahrenheit. We offer Alloy 600 Outlet Fittings at the best lowest prices in the industry. Inconel 600 outlet fittings can also be roll-threaded without affecting the grain size after full age by utilizing induction heat to 1,300 degrees Fahrenheit (704 degrees Celsius). Extreme environments frequently contain Inconel 600 Outlet Fittings because of their resistance to oxidation at high temperatures.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
Scroll to Top