Incoloy 800 Round Bars Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Incoloy 800 Round Bars , where when cold formed extensively the grain size produces a visibly undulated surface called “orange peel”. Excellent cold forming characteristics typically associated with the nickel – chromium alloys are exhibited with Incoloy 800 Round Bars. The carbon range of 0.05 % to 0.10 % is within the ASTM and ASME specification limits for Incoloy 800H Square Bars and is in the upper portion of that range. Incoloy 800HT Flat Bars is used for process piping, heat exchangers, heating – element sheathing, carburizing equipment, and nuclear steam – generator tubing.

Incoloy 800 Round Bars Manufacturer In India | Incoloy 800 Round Bars Manufacturer In Mumbai | Incoloy 800 Round Bars Exporter In India | Incoloy 800 Round Bars Exporter In Mumbai | Incoloy 800 Round Bars Supplier In India | Incoloy 800 Round Bars Supplier In Mumbai | Incoloy 800 Round Bars Stockist In India | Incoloy 800 Round Bars Stockist In Mumbai 


Incoloy 800 Round Bars
           Incoloy 800 Round Bars

Incoloy 800 Threaded Bars remains ductile during long term use at temperatures below 1290 Degree F (700 Degree C) due to a maximum titanium and aluminum content of 0.7 %. Alloy 800H Hollow Bars is a solution heat treated (2100 Degree F), controlled-carbon version of Alloy 800 Hexagonal Bars with improved elevated temperature properties.

Incoloy 800HT Triangular Bars is an alloy of nickel, chromium and iron, which is capable of remaining stable and maintaining its austenitic structure even after long time exposures to high temperatures While Incoloy 800 Bars is generally used at temperatures below 600 Degree C, Incoloy 800HT Rods are recommended for applications requiring superior creep properties at higher temperatures. Incoloy 800H Round Bars can be welded by the common techniques used on stainless steels.

Incoloy 800/800H/800HT Round Bar Specifications
Specifications : ASTM B408 / ASTM SB408
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
: 5 mm To 500 mm
Diameter : 0.1 mm to 100 mm
Length : 100 mm To 3000 mm Long & Above
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

800/800H/800HT Incoloy Round Bar Chemical Composition


Grade C Mn Si Al S Cr Cu Ni Fe
Incoloy 800 0.10 max 1.50 max 1 max 0.15 – 0.60 0.015 max 19.0-23.0 0.75 max 30.0-35.0 39.5 min
Incoloy 800H 0.05 – 0.10 1.50 max 1 max 0.15 – 0.60 0.015 max 19.0-23.0 0.75 max 30.0-35.0 39.5 min
Incoloy 800HT 0.06 – 0.10 1.50 max 1 max 0.15 – 0.60 0.015 max 19.0-23.0 0.75 max 30.0-35.0 39.5 min

Incoloy Alloy 800/800H/800HT Rods Mechanical Properties


Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 800/800H/800HT Incoloy Round Bar


Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21

Incoloy 800/800H/800HT Round Bar Application Industries


  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

800/800H/800HT Incoloy Rods Test Certificates


We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing


We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test



• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)