Hastelloy X Hydraulic Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy X Hydraulic Fittings, which is being heat – treated at 2050 Degree F, and then rapid quenched condition. Our Hastelloy X Hydraulic Type Fittings can easily be cold – worked because of its ductility and cold – forming is the preferred method of forming. These Hastelloy X Forged Hydraulic Fittings is truly an all-purpose metal, which is best known for its wear and galling resistance.

Hastelloy X Hydraulic Fittings Manufacturer In India | Hastelloy X Hydraulic Fittings Manufacturer In Mumbai | Hastelloy X Hydraulic Fittings Exporter In India | Hastelloy X Hydraulic Fittings Exporter In Mumbai | Hastelloy X Hydraulic Fittings Supplier In India | Hastelloy X Hydraulic Fittings Supplier In Mumbai | Hastelloy X Hydraulic Fittings Stockist In India | Hastelloy X Hydraulic Fittings Stockist In Mumbai

 

Hastelloy X Hydraulic Fittings
   Hastelloy X Hydraulic Fittings

Our austenitic Hastelloy X Hydraulic Forged Fittings was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800 Degree F. The oxidation resistance of these Alloy X Hydraulic Type Fittings is similar to SS 309, and also far superior to SS 304S. The additions of Silicon and Manganese have given our Alloy X Forged Hydraulic Fittings a matrix to inhibit wear, galling, and fretting even in the annealed condition.

Higher strengths in these Alloy X Hydraulic Forged Fittings are attainable through cold working the material and are still fully austenitic after severe cold – working. This working does not enhance the anti – galling properties of our Hastelloy UNS N06002 Hydraulic Fittings as are normal for carbon steels and some stainless steels. The benefit to the cold or hot work put into these Alloy N06002 Hydraulic Type Fittings is added strength and hardness, and the wear resistance does not decrease noticeably.

Hastelloy X Hydraulic Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : 1/16” to 2″ inch
Thread : NPT, BSP, BSPT, IMPRIAL UNF, ISO, SAE, etc.
Pressure Rating
: 3000 – 6000 PSI
PTFE Standards : ASTM 3294, ASTM D1710
Applicable temperature : 150-400°C
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting
Hastelloy X Hydraulic Fittings Chemical Composition

 

Grade Ni Mo Cr Fe Mn C Co Si P S
Hastelloy X Balance 8.00 – 10.00 20.50 – 23.00 17.00 – 20.00 1.00 max 0.05 – 0.15 0.50 – 2.50 1.00 max 0.04 max 0.03 max
Hastelloy Alloy X Hydraulic Fittings Mechanical Properties

 

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.22 g/cm³ 1355°C 655 MPa 240 MPa 35%
Equivalent Grades for Alloy X Hydraulic Tube Fittings

 

STANDARD WERKSTOFF NR. UNS
Hastelloy X 2.4665 N06002
Hastelloy Alloy X Hydraulic Fittings Application Industries

 

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Hastelloy X Hydraulic Tube Fittings Test Certificates

 

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

 

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

 

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Hastelloy X Hydraulic Fittings

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy X Hydraulic Fittings, which is being heat – treated at 2050 Degree F, and then rapid quenched condition. Our Hastelloy X Hydraulic Type Fittings can easily be cold – worked because of its ductility and cold – forming is the preferred method of forming. These Hastelloy X Forged Hydraulic Fittings is truly an all-purpose metal, which is best known for its wear and galling resistance.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
Scroll to Top